MS-HV50 syringe filter is a sterilizing filter for aqueous solutions and venting.It removes microorganisms, particles, precipitates, and undissolved powders larger than nominal pore size ,such as 0.22 micron (μm). The MS-HV50 syringe filter is non-pyrogenic and non-toxic. The special construction allows minimal hold-up volume and particle shedding,making MS-HV50 filters ideally suited for the critical needs of the pharmaceutical and biotechnology industries.
| Materials of construction |
| Filter Medium: PTFE or PES for GMP on a polypropylene support or Glass Fiber |
| Housing: Polypropylene |
| Dimensions |
| Inlet to outlet 45 mm (1.77 in.) |
| Diameter 56.2 mm (2.21in.) |
| Filtration area 17.2 cm²（2.6 in²) |
| Pore size 0.22 μm,0.45μm,0.8 μm, 1.2μm |
| Temperature limit |
| 130°C (266°F) maximum |
| Pressure limit at ambient temperature |
| 60psi (4.1bar) |
| Connections |
| Outlet ： Stepped hose barbs, 6.6 - 11.1mm (1/4 – 3/8in.) diameter |
| Inlet ：1/8 in. MNPT |
| Nominal weight (unpackaged) |
| 13.3 grams each |
| Sterilization |
| ETO |
| Autoclave @ 121℃（132℃ max）for 20 minutes |
| Gamma radiation |
| Biological Safety |
| Filter medium and housing material meet USP XXII Class VI,121 ℃ |
| USA | China | Japan |
| Toll Free: 1-866-528-4572 Fax: 732-412-4040 |
Toll Free: 400-820-0293 Fax: 0086-21-51687551 |
Toll Free: 0066-33-800658 |
