Home > Products > Membrane Products > PES Membrane

    

Product ID	Nominal Poresize [µm]	Minimum Bubble point		Water Flow Rate(≤)	Burst Strength (≤N psi)
		[psi]	[bar]	(seconds/100 ml H2O/9.62 cm2 at 24 inc Hg)
MSPES010	0.10	30	2.1	130	18
MSPES022	0.22	49	3.4	30	16
MSPES045	0.45	38	2.7	21	16
MSPES065	0.65	27	1.9	17	10
MSPES080	0.80	16	1.1	8	10
MSPES120	1.20	8	0.6	/	8
MSPES500	5.00	5	0.4	/	8

Sterilization	Gamma Irradiation, Ethylene Oxide (EtO), Autoclaving or Live Steam
Endotoxin levels and Class VI toxicity	Passed
Thickness	110 - 150 μm
Extractables	<2% (<0.015 mg/cm2)
BSA Protein Binding	<20 μg/cm2
Maximum Operating Temperature	130° C (266° F)
Sealing Compatibility	Ultrasonic, Heat, Radio Frequency and Insert Molding
Pore Size Range	0.03 to 20.0 μm

Double skin on an open anisotropic pore structure

      The highly asymmetrical pore structure of our PES flat membrane offers a high dirt loading capacity, increasing the filtration performance to give higher throughputs and higher flow rates than symmetrical membranes

Mechanical properties
The double skin construction of all PES flat membranes provides excellent mechanical properties.
Thickness	110μm
Tensile Strength	>700cN/15 mm
Elongation at Break	>25%
Change of Length (steam, 121 oC)	<3%
Burst Pressure	>1bar

Item Number	Membrane Material	Filter Pore Size(μm)	Filter Size (mm Χ mm)
MSPES022	PES	0.22	25.4Χ200

      Membrane Solutions Hydrophilic membrane are available in different diameters, pore size, lurelock connections and packing depends on your quantity, can be customized to meet your application requirements. Because Membrane Solutions is specialized OEM manufacture, all customization can be done easily and cost effectively.