MS® Filtration Products
MS® PP Cartridge Filter
Features
Polypropylene filter cartridges are precisely manufactured for use in critical filtration applications within food, pharmaceuticals, biotech, dairy, beverages, brewing, semiconductor, water treatment & other demanding process industries.
Polypropylene Pleated cartridges use the very latest gradient density micro fiber media technology to provide a combination of excellent micro ratings, high flow rates and high contaminant holding capacities. A special combination of polypropylene media with variation in the fiber diameter has created a gradient density matrix, ranging from open on the outside to finer on the inside.
Thereby providing a filter with in filter, which considerably increases contamination holding capacity & throughputs.
All components used in the manufacture are biologically safe, chemically inert and meet GMP and other international quality requirements. Polypropylene offers an extremely broad chemical compatibility making it suitable for many applications.
Polypropylene Pleated cartridges use the very latest gradient density micro fiber media technology to provide a combination of excellent micro ratings, high flow rates and high contaminant holding capacities. A special combination of polypropylene media with variation in the fiber diameter has created a gradient density matrix, ranging from open on the outside to finer on the inside.
Thereby providing a filter with in filter, which considerably increases contamination holding capacity & throughputs.
All components used in the manufacture are biologically safe, chemically inert and meet GMP and other international quality requirements. Polypropylene offers an extremely broad chemical compatibility making it suitable for many applications.
Features & Benefits
- All Polypropylene Construction
- Absolute & Nominal Efficiency
- 0.1 to 40 Micron Ratings
- Gradient Density Micron Fiber Media
- High Surface Area more than 0.5 m2
- Robust Outer Cage
- Biologically Safe
- Wide Compatibility
- Non Fibber Migration
- Thermally Welded Construction
- FDA Approved Filters
- End connections to fit all standard housings
Technical Specifications
| Sizes | |
| 5",10", 20", 30", 40" Long | |
| Micron Rating | |
| 0.2~5.0 Micron | |
| Outer Diameter | |
| 70 mm | |
| Inner Diameter | |
| 28 mm | |
| Maximum Differential Pressure(25°C) | |
| Positive direction: 0.42Mpa | |
| Reverse direction: 0.21Mpa | |
| Applicable pH value | |
| 3~7.5 | |
| Working Temperature& Differential Pressure | |
| ≤80°C(Differential Pressure:0.21 Mpa) | |
| Code 3 S (222 O Ring Design/flat) | |
| Construction | |
| Filter Media | 100 % Melt Blown Micro Denier Polypropylene Fiber |
| Support Media | Polypropylene Fiber |
| Inner Core | High Strength Polypropylene |
| Outer Core | High Strength polypropylene |
| End Caps | High Strength Polypropylene |
| O Ring / Gaskets | EPDM / Silicone / Fl Rubber |
Applications
| Fine Chemicals and Pharmaceuticals | |
| D.I. Water | |
| R.O. Pre filtration | |
| Biological Fluids | |
| Oral Drugs | |
| Ophthalmic Liquids | |
| Photographic Film & Paper | |
| Anti-Halation Coatings | |
| Developer Chemicals | |
| Emulsions | |
| Gelatins | |
| Beverages | |
| Wine | |
| Alcohols | |
| Fruit Juice | |
| Beer | |
| Electronic and Semi-Conductor | |
| De-ionized Water Prefiltration |
|
| Magnetic tapes |
|
| Premix Resins |
|
| Tape Coatings | |
Order Information
| Product No. | Size (Length) |
Micron Rating(μm) |
Outer Diameter(mm) | Connect Type | O-Ring |
| MSPP005 | 5" | 0.2~5.0 | 70 |
222-Insert 215-Insert 226-Wedge Crop |
EPDM Silicone Fl Rubber |
| MSPP010 | 10" | ||||
| MSPP020 | 20" | ||||
| MSPP030 | 30" | ||||
| MSPP040 | 40" |
Cartridge Filter Main Page PP PES PTFE MCE Nylon PVDF
Home | Contact Us | Site Map | All About Membrane
USA Toll Free: 800-553-9057
Fax: 732-412-4040
China Toll Free: 400-820-0293
Fax: 0086-21-51687551
Japan Toll Free: 0066-33-800658