EPC/EHC Capsule Filter

Description

EPC/EHC Series Capsule Filter includes various filtering media, removal ratings, filtering area, and adaptor types and sizes to meet different operating conditions. The Capsule Filter is thermally welded into the housing without any adhesive, ensuring no risk of fiber shedding. This compact structure is easy to replace, reducing operator contact with solvents during operation and significantly enhancing safety.

Feature

Multiple adaptor types available.
Various filtering media and removal ratings options.
Minimizes liquid contact during replacement.
Compact size, easy to replace and operate.
Thermally welded construction without fiber shedding.

Applications

Microelectronics
Chemicals
Cosmetics
Inks

Technical Parameters

Materials of Construction	Filter Membrane	PP/PS/PES/UPE/PTFE/Nylon, etc.
	Support/Drainage	PP/HDPE
	Cage/Skeleton	PP/HDPE
	Sealed via thermal welding, adhesive-free
Removal Ratings	PP: 0.1µm、0.2µm、0.5µm、1.0µm、3.0µm、5.0µm、10µm、20µm
	PS/PES: 10nm、20nm、30nm、50nm、0.1µm、0.2µm、0.5µm、1.0µm、
	3.0µm、5.0µm、10µm
	Hydrophilic/Hydrophobic UPE: 2nm、5nm、10nm、30nm、50nm、0.1µm、0.2µm、1µm
	Hydrophilic/Hydrophobi c PTFE: 10nm、20nm、30nm、50nm、0.1µm、0.2µm、0.5µm、
	1.0µm、5.0µm、10µm
	Nylon: 10nm、20nm、30nm、50nm、0.1µm、1µm
Operating Conditions	PP Housing	Maximum pressure 4.1 bar @ 25°C
		Max temperature 80°C
	HDPE Housing	Maximum pressure 3.4 bar @ 25°C
		Max temperature 40°C

* For details on the selection of removal rating, please contact MS.

Dimensions

Ordering Information

EPC -PP housing EHC -HDPE housing	Membrane Material	Removal ratings	External diameter	Length	Adaptor 1/0		Adaptor V/D	Washability	Packaging	Component
	P=PP UG=Hydrophobic UPE UL=Hydrophilic UPE N=Nylon S=PS E=PES FG=Hydrophobic PTFE FL=Hydrophilic PTFE	A=20nm C=30nm G=50nm B=0.1μm J=0.2μm H=0.45μm U=lμm K=3μm L=5μm M=10μm N=20μm O=30μm P=50μm	M=100mm S=83mm L=72mm	15=1.5" 25=2.5" 50=5"	N2=1/4"NPT N3=3/8"NPT N4=1/2"NPT NF2=1/4"NPTF NF3=3/8"NPTF NF4=1/2"NPTF P3=3/8"Pillar	SW2=1/4"Swage SW3=3/8"Swage SW4=1/2"Swage F2=1/4"Flaretek F3=3/8"Flaretek H3=3/8"single hosebarb H4=1/2"single hosebarb	N1=1/8"NPT SW2=1/4"Swage F2=1/4"Flaretek P2=1/4"Pillar L1=1/8"Luer L2=1/4"Luer H2=1/4"HB	Blank=No flushing requirement E=e-wash K= High Purity Cleaning (Particles) C/R/Q/U=High Purity Cleaning (Metal Ions)	D=dry pack W=Pre-wetted packaging	Blank=No component requirements N=nut
					P4=1/2"Pillar MH2=1/4" multi hosebarb TC4=1/2"TC MH3=3/8" multi hosebarb TC8=1"TC SH=multiple 1/4"-3/8"HB TCA=1.5"TC

*This ordering information is a guide for selecting cartridge specifications. Please contact MS if you require any other special fittings or installation details.