Normal Series PP Stainless Steel Gas Filter
The Stainless Steel Normal-Series is specifically designed for bulk gases. It features a PP inner core, providing a cost-effective filtration solution for non-critical processes. Equipped with a PTFE filter membrane, it achieves a removal rating of up to 0.003μm and is commonly used for process gases such as compressed air, nitrogen, and inert gases.
Full Description
Online Ordering
*Some specialized product specifications are not displayed. For further details, please click here leave us a message.
| Specs | Number | Description | Price |
|---|
Related Documents
![]() |
| Datesheet Stainless Steel Normal Series Gas Filter |
Features
- 316L electrolytic polishing shell,PTFE filter membrane,high chemical compatibility
- 100% integrity and helium leak detection
Applications
Technical Parameters
| Material | Filter Membrane | Hydrophobic PTFE | |||
| Core | PP | ||||
| O-ring | FKM | ||||
| Housing | Electrolytic Polishing 316L | ||||
| Internal Surface Treatment | Roughness | ≤0.64μm | |||
| Removal Rating | ≥0.003μm | ||||
| Filtration Area | ≥460cm² | ||||
| Recommended Operating Flow Rate | 0-600slpm | ||||
| Adaptor | 1/4"、3/8"、1/2"VCR;1/4"、3/8"、1/2"SWG;1/ | 4"、1/2"NPT | |||
| Helium Leak Testing | Design Verification | 2×10¹atm.cm³/sec | |||
| Process Verification | 1×10⁹atm.cm³/sec | ||||
| Operating Conditions | Maximum Operating Pressure | 5.2 MPa@80℃ | |||
| Maximum Operating Forward Differential Pressure | 0.4MPa@23℃ | ||||
| Maximum Operating Reverse Differential Pressure | 0.3MPa@23℃ | ||||
| Maximum Operating Temperature | 80℃ | ||||
FAQ

