P-type PP Stainless Steel Gas Filter
The Stainless Steel P-Type Series is specifically designed for bulk gases. It features a PP inner core, providing a cost-effective filtration solution for non-critical processes, with the PTFE filter membrane achieving a removal rating of 0.003um.It is commonly used for process gases such as compressed air, nitrogen, and inert gases.
Full Description
Online Ordering
*Some specialized product specifications are not displayed. For further details, please click here leave us a message.
| Specs | Number | Description | Price |
|---|
Related Documents
 |
| Datesheet Stainless Steel P-Type Series Gas Filter |
Features
- 316L electrolytic polishing shell, PTFE filter membrane, high chemical compatibility
- 100%integrity and helium leak detection
Applications
Technical Parameters
| Material | Filter Membrane | Hydrophobic PTFE | ||
| Core | PP | |||
| O-ring | FKM | |||
| Housing | 316L | |||
| Internal SurfaceTreatment | Roughness | ≤0.64μm | ||
| Removal Rating | ≥0.003μm | |||
| Recommended Operating Flow Rate | 0-3000slpm | |||
| Adaptor | 1/2"、3/4"、1"VCR;1/2"、3/4"、1"SWG;1/2"NPT | |||
| Helium Leak Testing | Design Verification | 2×10¹atm.cm³/sec | ||
| Process Verification | 1×10⁹atm.cm³/sec | |||
| Operating Conditions | Maximum Operating Pressure | 1.2MPa@80℃ | ||
| Maximum Operating Forward Differential Pressure | 0.4MPa@23℃ | |||
| Maximum Operating Reverse Differential Pressure | 0.3MPa@23℃ | |||
| Maximum Operating Temperature | 80℃ | |||
FAQ