MS® Acrylic Homopolymer Needle-punched Filter Felt
Request a QuoteProduct Description
Acrylic homopolymer needle-punched filter felt are available in woven or felt, this product provides chemical resistance similar to polypropylene while allowing operation up to 250 F (121 C).
Features
- Excellent combination of filtration efficiency and dust cake release
- Good chemical resistance to acids and alkalis
Application
- Chemicals processing: dryers in the pigment, plastic, and catalyst industries
- Minerals processing: dryers and finish mills in the cement industry
- Metals processing: process collectors in the lead, primary base metal, and foundry industries
Technical Parameter
| Fiber Composition | Acrylic homopolymer |
| Base Fabric Composition | Acrylic homopolymer |
| Weight（g/m²） | 500 |
| Thickness (mm) | 2 |
| Density (g/m³) | 0.24 |
| Air Permeability（m³/m²/min@12.7mmH2O） | 10 |
| Warp Strength (N/5×20cm) | 800 |
| Weft Strength (N/5×20cm) | 1100 |
| 260℃ Warp Dry Heat Shrink Rate (%) | <1 |
| 260℃ Weft Dry Heat Shrink Rate (%) | <1 |
| Working Temperature (℃) | 125 |
| Anti-acid | Common |
| Anti-alkali | Common |
| The Stability of Water Solution | Excellent |
| Surface Treatment | Singeing、calendaring、heat setting |