MS BagPure Pleated Filter Cartridge with High Flow
Request a QuoteItem No | Product Name | Description | |
---|---|---|---|
CRHBPP016100CN | BagPure Cartridge Filter | Filter Meida:Polypropylene, 16inch, 1μm, Vertical, NBR seal | Request a Quote |
CRHBPP0167000CE | BagPure Cartridge Filter | Filter Meida: Polypropylene, 16inch, 70μm, Vertical, EPDM seal | Request a Quote |
CRHBPP0250500C3E | BagPure Cartridge Filter | Filter Meida:Polypropylene, 25inch, 5μm, Vertical Flange, Flange OD183mm, EPDM seal | Request a Quote |
CRHBPP025100C3E | BagPure Cartridge Filter | Filter Meida:Polypropylene, 25inch, 1μm, Vertical Flange, Flange OD183mm, EPDM seal | Request a Quote |
CRHBPP0254000CE | BagPure Cartridge Filter | Filter Meida:Polypropylene, 25inch, 40μm, Vertical Flange, EPDM seal | Request a Quote |
CRHBPP0265000C7E | BagPure Cartridge Filter | Filter Meida:Polypropylene, 26inch, 50μm, Vertical Flange, Flange OD177mm, EPDM seal | Request a Quote |
CRHBPP027500CNF | BagPure Cartridge Filter | Filter Meida:Polypropylene, 27inch, 5μm, Vertical, NBR seal | Request a Quote |
CRHBPP031050CE | BagPure Cartridge Filter | Filter Meida:Polypropylene, 31inch, 0.5μm, Vertical, EPDM seal | Request a Quote |
CRHBPP0311000CN | BagPure Cartridge Filter | Filter Meida:Polypropylene, 31inch, 10μm, vertical, NBR seal | Request a Quote |
CRHBPP031500CNM | BagPure Cartridge Filter | Filter Meida:Polypropylene, 31inch, 5μm, Vertical, NBR seal | Request a Quote |
Description
MS BagPure cartridge filter is a kind of high capacity, pleated cartridge filter. With the structure of large diameter 6 ", single-ended openings and depth materials pleated technology. The filter area is 8 times than ordinary bag filter; in this case, it can greatly reduce the maintenance cost and change frequency.With a recommended flow rate up to 50 GPM per 16inch and a suggested maximum differential pressure of 40 PSI per 16inch, BagPure cartridge filter is the optimal choice of replacement of bag filter.
Features
-
Diameter 6 "(152 mm) is suitable for large flow and high volume applications
-
The unique design of this pleated bag provides a large effective filter surface area within the space constraints of a standard bag filter basket.
-
Dirt holding capacity is maximized by pleating three layers of filter media together in a single pleat pack.
-
Can be directly installed in most of the no. 1 or 2 filter bag housing, do not need to change or modification
-
Inside to outside flowing direction ensures all impurities trapped on inside of the filter cartridge
Applications
-
Reverse osmosis system prefiltration, all kinds of process water purification treatment
-
All kinds of process water, condensed water, cooling water, waste water treatment, etc
-
DI water filter
-
All kinds of acid, alkali, etc and other various chemicals filtration
Technical Parameters
Materials of Construction |
Filter Material |
Pleated Polypropylene/Glass Fiber |
Support Medium |
Polypropylene |
|
End Cap |
Glass fiber reinforced polypropylene |
|
O-ring |
EPDM, NBR |
|
Filter Dimensions |
Outer Diameter |
6"(152mm) |
Length |
16"(405mm)——Replace the filter bag no. 1 31"(785mm)——Replace the filter bag no. 2 |
|
Filtration Area |
2.8m2@16"; 4.5m2@31" |
|
Recommended Performance Parameters |
Maximum Operating Temperature |
2.8 bar@60℃ |
Maximum Operating Pressure |
Deep pleated polypropylene:3.4 bar@82℃ Resin synthetic glass fiber:3.4 bar@121℃ |
|
Recommended pressure difference for filter cartridge replacement |
2.4 bar@20℃ |
|
Flow Direction | Inside to Outside |
High Flow Dimensional Drawing
*Bag02
Ordering Information
CRHB
|
Filter Material |
Length |
Removal Ratings |
Flange Type |
Sealing |
PP=Polypropylene GF=Glass fiber
|
016= 16" 031= 31" |
010=0.1μm 050=0.5μm 100=1μm 500=5μm 1000=10μm 2000=20μm 4000=40μm 7000=70μm
|
B=For side entry housing C=For over the top housing
|
E= EPDM N= NBR |
*This ordering information is a guide for selecting filter cartridge specifications. For other special connections or installation details, please contact MS.