- Microelectronics /
- Pleated Filter Cartridges /
- PTFE Pleated Filter Cartridges /
- CF/CL Series - PTFE Pleated Filter Cartridge with High Flow Rate and Long Service Life

Ø83/Ø130 CF Series-Hydrophobic PTFE Pleated Filter Cartridge with High Dirt Holding Capacity for FPD Wet Process
Request a QuoteItem No | Product Name | Description | |
---|---|---|---|
CRCFC10H10RF-E | CF Series Cartridge | Pore Size: 10μm, Length: 10inch, OD: 83mm, Adapter Type:226/Flat , Sealing:FKM, Package: Dry | Request a Quote |
CRCFH10100GPV-E | CF Series Cartridge | Pore Size:1.0μm, Length: 10inch, OD: 131mm, Adapter Type: 334/Flat, Sealing: FEP Encapsulated FKM | Request a Quote |
CRCFH10300GPV-E | CF Series Cartridge | Pore Size: 3.0μm, Length: 10inch, OD: 131mm, Adapter Type: 334/Flat, Sealing: FEP Encapsulated FKM | Request a Quote |
CRCFH10G10GPV-E-S001 | CF Series Cartridge | Pore Size: 0.01μm, Length: 10inch, OD: 131mm, Adapter Type: 334/Flat, Sealing: FEP Encapsulated FKM | Request a Quote |
Description
The CF series adopts a PTFE hydrophobic membrane with high flow rate and high porosity, which has a wide range of chemical resistance, especially suitable for the filtration of most chemicals and organic solvents in the electronics industry. Among them, the Φ130 CF series pleated filter cartridge is specially designed for the high-flow required by the high-generation liquid crystal display process.
Features
-
Excellent chemical compatibility, especially suitable for the filtration of etching solutions, stripping liquids, diluents, developers, cleaning agents and other chemicals
-
Clean workshop production, using hot-melt welding technology, no pollution
-
Optional hydrophilic PTFE filter medium, can form a low differential pressure to increase flow rates and extend service life
-
Available in two sizes and pre-wetting
Applications
-
Suitable for panel TFT-LCD, LTPS, OLED and other wet process high flow (Ø83 series), high-generation line G7, G8.5, G10, G10.5 and other ultra-high flow (Ø130 series) filtration applications
-
Very suitable for most LCD wet processing chemical filtration applications, such as etching solutions, stripping fluids, diluents, developers, cleaning agents and other chemical filtration applications
Technical Parameters
Series |
CF |
CL |
CF |
CL |
|
Specifications |
Φ83 |
Φ130 |
|||
Materials of Construction |
Filter Material |
Hydrophobic PTFE |
Hydrophilic PTFE |
Hydrophobic PTFE |
Hydrophilic PTFE |
Support/Drainage |
PP |
||||
Cage and End Cap |
PP |
||||
Core |
PP/316 Stainless Steel |
||||
Adaptor |
222/Flat, 226/Flat |
334/Flat |
|||
Removal Ratings |
0.05μm,0.1μm,0.22μm,0.45μm,0.65μm,1.0μm,3.0μm,5.0μm,10.0μm |
||||
Dimensions |
Outer Diameter |
83mm |
130mm |
||
Length |
10inches |
||||
Filtration Area |
≥1.2m² |
≥2.4m² |
|||
Operating Conditions |
Maximum Operating Temperature |
80℃/176℉ |
|||
Maximum Differential Pressure (forward) |
4.2 bar @ 25℃ |
||||
Maximum Differential Pressure (reverse) |
2.4 bar @ 25℃ |
Typical Liquid Flow Rates
Dimensions
Ordering Information
CRCF=Hydrophobic PTFE CRCL=Hydrophilic PTFE |
Length |
Pore Size |
Adaptor |
Sealing Material |
C10=10〞/Φ83 H10=10〞/Φ130 |
005=0.05μm 010=0.1μm 020=0.22μm 045=0.45μm 065=0.65μm 100=1.0μm 300=3.0μm 500=5.0μm H10=10.0μm |
Q=222/Flat R=226/Flat G=334/Flat |
S=Silicone E=EPDM F=FKM N=Nitrile PV= FEP Encapsulated FPM/FKM PS= FEP Encapsulated Silicone |