Chemical Producer
Request a QuoteChemical Filtration
Filtration is commonly the mechanical or physical operation which is used for the separation of solids from fluids (liquids or gases) by interposing a medium through which only the fluid can pass. The fluid that pass through is called a filtrate. Oversize solids in the fluid are retained, but the separation is not complete; solids will be contaminated with some fluid and filtrate will contain fine particles (depending on the pore size and filter thickness). Filtration is also used to describe some biological processes, especially in water treatment and sewage treatment in which undesirable constituents are removed by absorption into a biological film grown on or in the filter medium as inslow sand filtration.
Filtration is also important and widely used as one of the unit operations of chemical engineering. It may be simultaneously combined with other unit operations to process the feed stream, as in the biofilter, which is a combined filter and biological digestion device.
Chemical filtration refers to any filtering substance that is designed to change the chemical composition of the water, but most often refers to the use of activated carbon or other cleaning resins. Activated carbon pulls dissolved organics from the water by adsorbing them.
Filter Media
Two main types of filter media are employed in any chemical laboratory— surface filter, a solid sieve which traps the solid particles, with or without the aid of filter paper (e.g. Büchner funnel, Belt filter, Rotary vacuum-drum filter, Cross-flow filters, Screen filter), and a depth filter, a bed of granular material which retains the solid particles as it passes (e.g. sand filter). The first type allows the solid particles, i.e. the residue, to be collected intact; the second type does not permit this. However, the second type is less prone to clogging due to the greater surface area where the particles can be trapped. Also, when the solid particles are very fine, it is often cheaper and easier to discard the contaminated granules than to clean the solid sieve.
Refinery Process
MS Experience in Refinery
Membrane Solutions can help you achieve the process improvements and cost savings. We provide valuable products and solutions for all our customers. Find out why the world's most successful companies turn to Membrane Solutions to help them achieve their most challenging goals, whether you are looking for materials to serve a specific purpose or industry or if you are trying to identify what materials may be best in a new application, Membrane Solutions has products which prove to be an excellent choice in meeting and exceeding your requirements.
Just as your products are used as raw materials by different types of chemical producers, Membrane Solutions filtration products and services can be sold to all segments of the chemical industry.
We offer a variety of cost-effective solutions that is unmatched in the separations industry.
Features & Benefits of MS® Filters for Chemical Filtration
- Quality of chemical filters is guaranteed for MS has ISO 9001 Certification & CE Market
- Certificate of FDA Registration
- Global Supply Chain and Efficient Customer Service
- Glass 100,000 clean Room
- Reduce unscheduled downtime
- Meet environmental emission standards
- Reduce corrosion rates, lengthen plant life, and improve safety
- Raise product yield and conversion
- Minimize product reprocessing
- Enable capacity expansion with minimum capital expense
- Help to utilize opportunity crudes
- Enable chemical producer to meet tighter product specifications
Recommended MS® Products
 |
 |
 |
|
MS® MicronPure Melt blown Cartridge Filter MS® melt blown cartridge filter is one of the deep filtration products. Graded pore structure enhances dirt holding capacity, long service life and high contaminant removal efficiency. |
MS® PolyPure Pleated Cartridge Filter MS® PolyPure Cartridge Filter is constructed of micro polypropylene and ideally suited for removing agglomerated particles and gels. Deep, wide pleats for long service life and construction optimized for consistent performance under variation in flow. |
MS® filter bags are designed for high accuracy and low cost filtration, feature 100% welded fabrication, preventing bypass problems, especially for filtration requirements on precision that common filter bags cannot reach. |
 |
 |
 |
|
MS® capsule filters are designed for critical, small volume filter applications in the coatings, fine chemicals, pharmaceuticals and microelectronics markets. They contain pleated, absolute-rated, filter media providing excellent retention of particles at fast flow rates. The all polypropylene construction offers superior chemical resistance and durability in demanding process applications. |
FibermaxPure Glass Fiber Cartridge Filter MS® FibermaxPure Glass Fiber Cartridge Filter cartridges deliver high efficiency and consistent filtration of fluids in a wide range to critical applications. |
MS ® string wound cartridge filter is a kind of deep filter cartridge, which is made of the textile fabric string (polypropylene, absorbent cotton and so on) preciously winding onto the multi hole axies according to the specific technology. The typical honeycomb structure of the filter body gives it a considerable capacity for accumulating impurities present in the fluid being filtered. |