Ø83/Ø130 CL Series Hydrophilic PTFE Pleated Filter Cartridge with High Dirt Holding Capacity for FPD Wet Process
Request a QuoteItem No | Product Name | Description | |
---|---|---|---|
CRCLH10020GPV-E | CL Series Cartridge | Pore Size: 0.20μm, Length: 10inch, OD: 131mm, Adapter Type: 334/Flat, Sealing: FEP Encapsulated FKM | Request a Quote |
CRCLH10050GPV-E-S001 | CL Series Cartridge | Pore Size: 0.50μm, Length: 10inch, OD: 131mm, Adapter Type: 334/Flat, Sealing: FEP Encapsulated FKM | Request a Quote |
CRCLH10100GPV-E | CL Series Cartridge | Pore Size:1.0μm, Length: 10inch, OD: 131mm, Adapter Type: 334/Flat, Sealing: FEP Encapsulated FKM | Request a Quote |
CRCLH10300GPV-E | CL Series Cartridge | Pore Size: 3.0μm, Length: 10inch, OD: 131mm, Adapter Type: 334/Flat, Sealing: FEP Encapsulated FKM | Request a Quote |
CRCLH10500GPV-E | CL Series Cartridge | Pore Size: 5.0μm, Length: 10inch, OD: 131mm, Adapter Type: 334/Flat, Sealing: FEP Encapsulated FKM | Request a Quote |
CRCLH10H20GPV-E | CL Series Cartridge | Pore Size:20, Length: 10inch, OD: 131mm, Adapter Type: 334/Flat, Sealing: FEP Encapsulated FKM | Request a Quote |
Description
The CL series uses a hydrophilic PTFE membrane that directly filters polar solutions without pre-wetting treatment, reducing operating time.
Features
-
Excellent chemical compatibility, especially suitable for the filtration of etching solutions, stripping liquids, diluents, developers, cleaning agents and other chemicals
-
Clean workshop production, using hot-melt welding technology, no pollution
-
Optional hydrophilic PTFE filter medium, can form a low differential pressure to increase flow rates and extend service life
-
Available in two sizes and pre-wetting
Applications
-
Suitable for panel TFT-LCD, LTPS, OLED and other wet process high flow (Ø83 series), high-generation line G7, G8.5, G10, G10.5 and other ultra-high flow (Ø130 series) filtration applications
-
Very suitable for most LCD wet processing chemical filtration applications, such as etching solutions, stripping fluids, diluents, developers, cleaning agents and other chemical filtration applications
Technical Parameters
Series |
CF |
CL |
CF |
CL |
|
Specifications |
Φ83 |
Φ130 |
|||
Materials of Construction |
Filter Material |
Hydrophobic PTFE |
Hydrophilic PTFE |
Hydrophobic PTFE |
Hydrophilic PTFE |
Support/Drainage |
PP |
||||
Cage and End Cap |
PP |
||||
Core |
PP/316 Stainless Steel |
||||
Adaptor |
222/Flat, 226/Flat |
334/Flat |
|||
Removal Ratings |
0.05μm,0.1μm,0.22μm,0.45μm,0.65μm,1.0μm,3.0μm,5.0μm,10.0μm |
||||
Dimensions |
Outer Diameter |
83mm |
130mm |
||
Length |
10inches |
||||
Filtration Area |
≥1.2m² |
≥2.4m² |
|||
Operating Conditions |
Maximum Operating Temperature |
80℃/176℉ |
|||
Maximum Differential Pressure (forward) |
4.2 bar @ 25℃ |
||||
Maximum Differential Pressure (reverse) |
2.4 bar @ 25℃ |
Typical Liquid Flow Rates
Dimensions
Ordering Information
CRCF=Hydrophobic PTFE CRCL=Hydrophilic PTFE |
Length |
Pore Size |
Adaptor |
Sealing Material |
C10=10〞/Φ83 H10=10〞/Φ130 |
005=0.05μm 010=0.1μm 020=0.22μm 045=0.45μm 065=0.65μm 100=1.0μm 300=3.0μm 500=5.0μm H10=10.0μm |
Q=222/Flat R=226/Flat G=334/Flat |
S=Silicone E=EPDM F=FKM N=Nitrile PV= FEP Encapsulated FPM/FKM PS= FEP Encapsulated Silicone |