Lenticular Filter Cartridge
Request a Quote| Item No | Product Name | Description | |
|---|---|---|---|
| CRDS004D12S16 | Depth Stack Filter | Positive charged cellulose, 0.4-0.6μm, DOE, OD12inch, Silicone Oring, 16 cell | Request a Quote |
| CRDS006D12N16 | Depth Stack Filter | Micron rate: 0.6- 1um, DOE Connection, OD：12'', NBR Oring, 16Cells | Request a Quote |
| CRDS006D12S16 | Depth Stack Filter | Micron rate: 0.6-1um, DOE Connection, OD：12'', Silicone Oring, 16Cells | Request a Quote |
| CRDS010D12S16 | Depth Stack Filter | Micron rate: 1-3μm, DOE Connection, OD：12'', Silicone Oring, 16Cells | Request a Quote |
| CRDS020D12E16 | Depth Stack Filter | Micron rate: 2-5um, DOE Connection, OD：12'', EPDM Oring, 16Cells | Request a Quote |
| CRDS030D12S16-P | Depth Stack Filter | Micron rate: 3- 6um, DOE Connection, OD：12'', Silicone Oring, 16Cells | Request a Quote |
| CRDS090D16S16 | Depth Stack Filter | Micron rate: um, DOE Connection, OD：16'', Silicone Oring, 16Cells | Request a Quote |
| CRDS100D12S16 | Depth Stack Filter | Positive charged cellulose, 10-15μm, DOE, OD12inch, Silicone Oring, 16 cell | Request a Quote |
Description
CRDS series lenticular filters are compounded with high-purity lignocellulose and inorganic filter aids (diatomite, etc.). Its special three-dimensional space of channel makes each square meter filter area has thousands of square meters of internal surface area, and has a very high dirt holding capacity and filtration quality. Diatomite and resin can not only improve the permeability of the filter plate, but also improve the overall adsorption of the filter plate, and effectively filter the impurities and microorganisms in the liquid through mechanical interception, electrostatic adsorption, etc. The deep stacking technology effectively solves the problems of material and liquid loss, heavy workload and high investment cost of the traditional plate and frame filter.
Features
-
Thermal disinfection or hot filter fluid has no adverse effect on the filter board
-
The operation is simple and reliable, and the solid outer skeleton design makes the filter cartridge not damaged during installation and disassembly
-
High-purity cellulose greatly reduce the ion precipitation grade and endotoxin content
-
The three-dimensional space structure and the porous structure of diatomite greatly improve the dirt holding capacity and service life
-
Flushable under certain conditions and extend the service life
Applications
-
Clarification and filtration of raw material liquid
-
Filtration of vaccines
-
Decarbonization filtration of LVP
-
Filtration of blood products
-
Sterilizing filtration of Chinese medicine liquid
-
Fine chemical industry
-
Food and beverages
Technical Parameters
|
Materials of Construction |
Filter Membrane |
Cellulose/Diatomite/Resin,etc. |
|
Skeleton/Support Separation Plate |
PP |
|
|
O-rings |
See ordering information selection table |
|
|
Operating Conditions |
Maximum Operating Temperature |
80℃ |
|
Maximum Differential Pressure |
2.0 bar/25℃, 1.0 bar/80℃ |
|
|
Product Guarantee |
The filter cartridges are all produced in 100,000 grade clean environment Strictly implement ISO 9001:2015 quality management system All filter cartridge materials and components are FDA certified materials |
|
Ordering Information
|
CRDS
|
Pore Size |
Connection |
Outer Diameter |
O-rings |
Structural Unit |
|
002=0.2-0.4μm 004=0.4-0.6μm 006=0.6-1μm 010=1-3μm 020=2-5μm 030=3-7μm 100=10-15μm 250=25-30μm 400=40-50μm 500=50-60μm |
D=Double Open End S=Single Open End (For 8"only) |
08=8" 12=12" 16=16" |
S=Silicone Rubber E=EPDM Rubber V=Fluorine Rubber
|
8=Layer 8 (8" DOE) 9=Layer 9 (12", 16") 12=Layer 12 (12", 16") 15=Layer 15 (12", 16") 16=Layer 16 (12", 16") |
