MS CrossPure-T Pleated Filter Cartridge with High Flow

Item No	Product Name	Description
CRHCPP010050EAT	CrossPure-T Cartridge Filter	Filter Media：PP, 10inch, 0.5μm, EPDM seal, Handle connect	Request a Quote
CRHCPP010100EAT	CrossPure-T Cartridge Filter	Filter Media：PP, 10inch, 1μm, EPDM seal, Handle connect	Request a Quote
CRHCPP010500EAT	CrossPure-T Cartridge Filter	Filter Media：PP, 10inch, 5μm, EPDM seal, Handle connect	Request a Quote
CRHCPP030100ANBT	CrossPure-T Cartridge Filter	Filter Media：PP, 30inch, Absolute 1μm, NBR seal, Cross connect	Request a Quote
CRHCPP0304000EAT	CrossPure-T Cartridge Filter	Filter Media：PP, 30inch, 40μm, EPDM seal, Handle Connect	Request a Quote
CRHCPP030500AEAT	CrossPure-T Cartridge Filter	Filter Media：PP, 30inch, Absolute 5μm, EPDM seal, handle connect	Request a Quote
CRHCPP030500EAT	CrossPure-T Cartridge Filter	Filter Media：PP, 30inch, 5μm, EPDM seal, Handle Connect	Request a Quote
CRHCPP040065EAT	CrossPure-T Cartridge Filter	Filter Media：PP, 40inch, 0.65μm, EPDM seal, Handle connect	Request a Quote
CRHCPP04010000EAT	CrossPure-T Cartridge Filter	Filter Media：PP, 40inch, 100μm, EPDM seal, Handle connect	Request a Quote
CRHCPP0401000SAT	CrossPure-T Cartridge Filter	PP, 40inch, 10μm, Silicone seal, Handle connect	Request a Quote

Description

Combining high flow rates and high solids is a challenge for most filters. MS CrossPure-T filter incorporates a special radial pleat, puts an extraordinary amount of surface area into a single cartridge, so it meets the challenge with the highest flow and dirt holding combination available. Each grade of MS high flow filter cartridge is manufactured with meltblown polypropylene microfiber media or resin bonded glass fiber, providing high particle removal efficiency with broad chemical compatibility. All supported layers and hardware are constructed with polypropylene.

Features

Designed to fit inside existing 3M housings and provide an O-ring seal without housing modification
Special radial pleat design
Ergonomically designed handle- facilitates easy cartridge installation and removal
“Twist to lock” seating mechanism provides positive seal
High flow capability of up to 500gpm per cartridge

Applications

Aqueous Salt Solution
Boiler Condensate
Completion Fluids
RO Prefiltration
Food & Beverage- Process Water
Pharmaceutical- Process Water

Technical Parameters

Materials of Construction	Filter Material	Deep pleated polypropylene, Pleated Glass Fiber
	Support/Drainage	PP
	End Cap	Glass fiber reinforced polypropylene
	O-ring	FKM, EPDM
	Pleat Type	Radial
Filter Dimensions	Outer Diameter	6.5"（165mm）
	Length	20",40",60"
	Filtration Area	8m²@40"
Recommended Performance Parameters	Maximum Operating Temperature	Deep pleated polypropylene：82℃ Resin synthetic glass fiber：121℃
	Maximum Operating Pressure	Deep pleated polypropylene：3.4 bar@82℃ Resin synthetic glass fiber：3.4 bar@121℃
	Recommended pressure difference for filter cartridge replacement	2.4 bar@20℃
	Flow Direction	Outside to Inside

High Flow Dimensional Drawing

Ordering Information

CRHC

Filter Material

Length

Removal Ratings

Sealing

Type of End Cap

PP=Deep pleated polypropylene

GF=Resin synthetic glass fiber

020=20"

040=40"

060=60"

100=1μm

300=3μm

500=5μm

1000=10μm

2000=20μm

5000=50μm

7000=70μm

E=EPDM

F=FKM

A=Type A

B=Type B

*This ordering information is a guide for selecting filter cartridge specifications. For other special connections or installation details, please contact MS.