CRST Series Metal Titanium Rod Filter Cartridge
Request a QuoteDescription
CRST series metal titanium rod filter cartridge is a microporous filter cartridge formed by high-purity titanium powder and sintered at high temperature and high vacuum. It has high porosity, good mechanical properties, high corrosion resistance, good chemical compatibility, no media shedding, very low leachables, can be repeatedly cleaned and reused, and low operating costs.
Features
-
Tubular porous structure
-
High mechanical strength
-
Good temperature resistance
-
Can be repeatedly cleaned and reused
Applications
-
Decarbonization filtration in concentration ration of LVP, small injection and oral liquid
-
Impurity removal and filtration of API production, sterilizing filtration of fermentation broth
-
Filtration of corrosive reagents
-
Filtration of high temperature liquid and steam
-
Filtration of ozone water at bottled water
Technical Parameters
|
Materials of Construction |
Removal Rating |
1μm/3μm/5μm/10μm |
|
Length |
5"/10"/20" |
|
|
Filter Membrane |
Sintered Titanium Powder |
|
|
Cage/End Cap/Core |
High-purity Titanium |
|
|
O-rings |
See filter cartridge selection table |
|
|
Operating Conditions |
Maximum Operating Temperature |
≤280℃ |
|
Maximum Differential Pressure |
3.0 bar |
Ordering Information
|
CRS |
Material |
Length |
Removal Rating |
End Cap |
Seal Material |
|
T=Titanium |
005=5" 010=10" 020=20" |
100=1μm 300=3μm 500=5μm H10=10μm |
2=222/Flat 7=226/Flat N=M30 Threaded Connection L=M20 Threaded Connection |
S=Silicone E=EPDM F=Fluorine N=Nitrile Rubber
|
