CSCH Series Cast Single Core Filter Housing
Request a QuoteDescription
The top of CSCH series filter housing adopts one-piece casting structure, horizontal inlet and outlet, internal thread at both ends, and the end cap can be fixed directly to the pipeline, so that the replacement of filter cartridge only needs to disassemble the housing, without disassembling the pipeline, which is more convenient and practical. Fine polishing, and the surface option Ra≤0.8μm. The filter housing can be adapted to the filter cartridge of 222 and DOE, so that a variety of filter cartridges can be selected for customers, which is suitable for precision filtration requirements ofvarious types of chemicals.
Characteristics and Advantages
- Top-in and top-out, it can be directly connected to the pipeline, easy to install
- The replacement of the filter cartridge only needs to disassemble the housing, without disassembling the pipeline, which is more convenient and practical
- Reasonable design structure, with drain valve at the bottom, no residual liquid when replacing the filter cartridge
- The housing sealing adopts tri-clamp to enhance the sealing performance and can withstand higher pressure
Specification
| Connection | Body Connection | Tri-Clamp |
| Inlet and Outlet | Thread | |
| Drain | 1/4"NPT | |
| Material | Housing Body | 304, 316L |
| Clamp | 304 | |
| Sealing Material | Silicone Rubber, Viton, EPDM | |
| Surface Polishing Treatment |
Polish Type | Mechanical Polishing, Sandblasting |
| Surface Option | Internal Ra:≤0.6μm, External Ra:≤0.8μm | |
| Operating Conditions | Design Pressure | 1.0 Mpa |
| Operating Temperature |
130℃ |
*Specific configuration parameters can be customized according to customer requirements
Drawings and Dimensions
| Size | |
| Inch | L(mm) |
| 2.5 | 63.5 |
| 5 | 130 |
| 10 | 240 |
| 20 | 530 |
| 30 | 760 |
| 40 | 1016 |
Ordering Information
| Number of Filters |
Material | Filter Length | Filter Cartridge Adaptor |
Inlet and Outlet Types |
Inlet /Outlet Size |
Sealing | Surface Polishing Treatment |
|
| CSCH | 01=Single Core |
S=304 L=316L |
05=5" 10=10" 20=20" 30=30" |
0=DOE 3=222 |
S=Thread | T6=3/4"BSPT T8=1"BSPT N4=1/2"NPT N6=3/4"NPT N8=1"NPT |
S=Silicone F=FKM E=EPDM |
MI=Mechanical Polishing (Industrial grade) C=Internal Polishing and External Sandblasting |
