MS®Membranas de RO de Agua Saloble
Características
- Esta membrana es adecuado para tratar aguas residenciales con TDS de 2000 a 4000ppm
- Alto rechazo de desalación y flujo estable
- Alta hidrófila membrana
- Larga vida út
Aplicación
Especificaciones
| Model Type | BWRO8040 | BWRO4040 |
| A (inch) | 40/1016 | 40/1016 |
| B (inch) | 7.84/201.8 | 3.94/99.6 |
| C (inch) | 1.13/28.6 | 0.75/19.1 |
| D (inch) | - | 1.05/26.7 |
| Active Membrane Area (ft2/m2) | 400/37 | 90/8.4 |
| Average Permeated FlowGPD (m3/d) | 10000/37.7 | 2200/8.3 |
| Stable Rejection Rate (%) | 99.5 | 99.5 |
| Minimum Rejection Rate (%) | 99.3 | 99.3 |
| Testing Pressure (psi) | 225 | |
| Testing Temperature（℃） | 25 | |
| Testing pH | 7.5 | |
| Testing Solution Concentration(NaCl, ppm) | 2000 | |
| Recovery Rate of Single Element | 8% | |
| Max. Working Pressure（psi） | 600 | |
| Max. Feedwater Flow（gpm) | 75(8040)/16(4040) | |
| Max. Feedwater Temperature（℃） | 45 | |
| Max. Feedwater SDI | 5 | |
| Free Chlorine Concentration of Feedwater（ppm） | ≤0.1 | |
| pH Range of Feedwater during Continuous Operation | 3-10 | |
| pH Range of Feedwater during Chemical Cleaning | 2-12 | |
| Max.Pressure Drop of Single Membrane Element（psi） | 15 | |
Notas: El flujo de permeado enumerado en la tabla es el valor medio. A continuación, el flujo de permeado del elemento de cada membrana es dentro de una tolerancia no superior a ± 15% del valor nominal.
Más páginas de memrbanas>>
RO Element
MS®BW RO Element
MS®LP Industrial RO Element
MS®SW RO Element
MS®FR RO Element
