MS® membranas domésticas especiales de ósmosis inversa puede eliminar las sustancias orgánicas, microorganismos, virus, iones metálicos, sustancias cáncer-orgánica, y otra de sal soluble.
Model of Element | A inch (mm) | B inch (mm) | C inch (mm) | D inch (mm) |
ROBS1812-60 | 11.7(298) | 1.8(44.5) | 0.68(17) | 0.82(21) |
ROBS-1812-100 | 11.7(298) | 1.8(44.5) | 0.68(17) | 0.82(21) |
ROBS2012-125 | 11.7(298) | 2.0(48.2) | 0.68(17) | 0.82(21) |
ROBS2012-150 | 11.7(298) | 2.0(48.2) | 0.68(17) | 0.82(21) |
ROBS3012-400 | 11.7(298) | 3.0(76.2) | 0.68(17) | 0.82(21) |
Model of Element | Average Permeated Flow GPD(m3/d) | Stable | Minimum Rejection Rate (%) | Testing Pressure(psi) |
Rejection Rate (%) | ||||
ROBS-1812-60 | 60(0.23) | 93 | 91 | 45 |
ROBS-1812-100 | 100(0.38) | 95 | 93 | 60 |
ROBS2012-125 | 125(0.47) | 95 | 93 | 60 |
ROBS2012-150 | 150(0.57) | 95 | 93 | 60 |
ROBS3012-400 | 400(1.52) | 95 | 93 | 100 |
Residual Chlorine Concentration of Feed water | ≤0.1ppm | Max. Feed water Temperature | 45℃(113℉) |
Testing Solution Temperature | 25℃(77℉) | Max. Working Pressure | 20.7bar(300psi) |
pH Value of Testing Solution | 7.5 | Max. Feed water Permeated Flow | 7.6LPM(2.0GPM) |
Recovery Rate of Single Element | 15% | pH Range of Feed water during Operation | 3~10 |
El flujo de permeado enumerado en la tabla es el valor medio. A continuación, el flujo de permeado del elemento de cada membrana es dentro de una tolerancia no superior a ± 15% del valor nominal.
Densidad de líquido de ensayo (NaCl):250ppm(1812/2012),500ppm(3012)
RO Element
MS®BW RO Element
MS®LP Industrial RO Element
MS®ULP Industrial RO Element
MS®SW RO Element
MS®FR RO Element
MS® Non-Standard RO Element