GSR Series Gas Sanitary Respirator
Request a Quote| Item No | Product Name | Description | |
|---|---|---|---|
| GSR01L056KDN25SE-14 | Gas Respirator | 316L, 1Core, 5inch, 226, Tri-clamp, Inlet/Outlet DN25 Clamp, Silicone O-ring, Electro Polishing | Request a Quote |
| GSR01S106KDN50SE-14 | Gas Respirator | 304, 1Core, 10inch, 226/Flat, Tri-clamp, Inlet/Outlet DN50 Clamp, Silicone O-ring, Electro Polishing | Request a Quote |
| GSR01S206KDN50SE-14 | Gas Respirator | 304, 1Core, 20inch, 226/Flat, Tri-clamp, Inlet/Outlet DN50 Clamp, Silicone O-ring, Electro Polishing | Request a Quote |
| GSR01S206KDN65SE-14 | Gas Respirator | 304, 1Core, 20inch, 226/Flat, Tri-clamp, Inlet/Outlet DN65 Clamp, Silicone O-ring, Electro Polishing | Request a Quote |
Description
GSR series respirator for storage tank is suitable to be installed on the ventilation holes of various liquid storage tanks, pure water tanks and sterile drying boxes. During gas exchange, the gas is filtered to ensure that the gas is isolated from the outside by the respirator to prevent contamination by bacteria or dust in the atmosphere when the air is discharged from the storage tank due to changes in liquid level, or when the gas is discharged from the sterile drying box.
Characteristics and Advantages
-
The design meets the requirements of sanitary grade and GMP with polishing up to 0.4μm, and electro-polishing is optional.
-
Filter housing is easy to install, disassemble and clean.
Specification
| Connection | Body Connection | Tri-clamp |
| Outlet | Tri-clamp, Flange | |
| Material | Housing Body | 304, 316L |
| Clamp | 304 | |
| Sealing Material | Silicone Rubber, Viton, EPDM | |
| Surface Polishing Treatment |
Polish Type | Precise Polishing, Electro-polishing |
| Surface Option | Internal Ra:≤0.4μm, External Ra:≤0.6μm | |
| Operating Conditions |
Design Pressure | 1.0 Mpa |
| Operating Temperature | 130℃ |
*Specific configuration parameters can be customized according to customer requirements
Drawings and Dimensions
| Size | |
| Inch | L(mm) |
| 2.5 | 120 |
| 5 | 190 |
| 10 | 300 |
| 20 | 590 |
Ordering Information
| Number of Filters |
Material | Filter Length |
Filter Cartridge Adaptor |
Inlet and Outlet Types |
Inlet /Outlet Size |
Sealing | Surface Polishing Treatment |
||
| GSR | 01=Single core | S=304 L=316L |
05=5" 10=10" 20=20" 30=30" |
3=222 6=226 |
K=Tri-clamp F=Flange |
DN25 DN40 DN50 |
S=Silicone F=FKM E=EPDM |
M=Precise Polishing (Sanitary grade) E=Electro-polishing |
14 6 |
