Submerged PVDF Hollow Fiber Module
Request a QuoteIntroduction
MS submerged hollow fiber membrane modules use outside-in filtration type of Reinforced PVDF Ultrafiltration membrane with 0.1μm pore size, and can effectively remove bacteria, virus, colloid, SS, etc, to meet the more higher water production standard of industrial water treatment. The Reinforced PVDF hollow fiber elements, with the features of high mechanical robustness, no silk broken, good chemical resistance and less membrane fouling, are widely used for industrial water reuse treatment and other complex industrial wastewater.
MS self-research and develop the Reinforced PVDF hollow fiber membrane, manufacture the submerged MBR membrane module, design and assembly the MBR package or MBR system for clients’ any needs.
Features
-
Meet the higher standard of permeate water quality
-
Lower filtration pressure and energy saving
-
Stronger chemical resistance, easily clean, and longer periods between chemical cleaning
-
Good hydrophilicity and strong fouling resistance
-
High standard of biomass/solids control
-
Lower operation cost and less components
-
Modular system design, easy assembly
Applications
- Municipal wastewater and Industrial water reuse
- High complex industrial water treatment
- Petrochemical waste water
- Landfill Leachate
- Pulp & Paper waste water
- Food & Beverage waste water treatment
MBR System Process
Specifications
| Module Type | MBRHF010A4010S | MBRHF010A6015S | |
| Membrane Surface Areas (m2) | 10 | 15 | 20 |
| Material | PVDF | PVDF | PVDF |
| Pore Size（μm） | 0.1 | 0.1 | 0.1 |
| ID/OD(mm) | 0.9/2.2 | 0.9/2.2 | 0.9/2.2 |
| Filter Type | Suction | Suction | Suction |
| L（mm） | 1000 | 1500 | 2000 |
| W（mm） | 380 | 380 | 380 |
| H（mm） | 30 | 30 | 30 |
| Conduit | DN25 | DN25 | DN25 |
| Air Intake | DN20 | DN20 | DN20 |
| Module Weight（kg） | 6 | 8 | 10 |
| Seal Gum Material | PU | PU | PU |
| Conduit Material | ABS | ABS | ABS |
| Operation Conditions | |||
| Operation Flux (L/H) | 100-300 | 150-450 | 250-750 |
| TMP (MPa) | -0.05 | -0.05 | -0.05 |
| Temperature Range (℃) | 5-40 | 5-40 | 5-40 |
| pH Range | 5-10 | 5-10 | 5-10 |
| Cleaning Conditions | |||
| Highest Temperature (℃) | 40 | 40 | 40 |
| pH Range | 2-10 | 2-10 | 2-10 |
| Most Active Chlorine (ppm) | 1000 | 1000 | 1000 |
More Cartridge Filter Main Page >>
MBR Modules
Submerged PVDF Flat Sheet MBR Module
Submerged PTFE Flat Sheet MBR Module
MBR Membranes
PVDF Hollow Fiber MBR System
PTFE Flat Sheet MBR System
PVDF Flat Sheet MBR System
