
JPF Series Mini Pleated Filter Cartridge
Request a QuoteItem No | Product Name | Description | |
---|---|---|---|
CRNYJ25020CMS | PolymidPure Series Cartridge | Pore Size: 0.20μm, Length: 2.5inch, OD: 42mm, Adapter Type: 113/Flat, Sealing: Silicone | Request a Quote |
CRNYJ50020MPS | PolymidPure Series Cartridge | Pore Size: 0.20, Length: 5, OD: 56mm, Adapter Type: 118/Flat with 4 bayonet, Sealing: Silicone | Request a Quote |
CRPESBJ25020CMS | SteriPure-B Series Cartridge | Pore Size: 0.20, Length: 2.5", OD: 42mm, Adapter Type: 113/Flat, Sealing: Silicone | Request a Quote |
CRPESBJ50020PK | SteriPure-B Series Cartridge | Pore Size: 0.20, Length: 5", OD: 56mm, Adapter Type: Special Flange, Sealing: Silicone | Request a Quote |
CRPPAJ25020CMS | PolyPure-AB Series Cartridge | Pore Size: 0.20μm, Length: 2.5inch, OD: 42mm, Adapter Type: 113/Flat, Sealing: Silicone | Request a Quote |
CRPPAJ25020MS | PolyPure-AB Series Cartridge | Pore Size:0.20μm, Length:2.5inch, Internal O-ring, Silicone | Request a Quote |
CRPTFEDGF25020CMS | FluorPure-DG Series Cartridge | Pore Size: 0.20μm, Length: 2.5inch, OD: 42mm, Adapter Type: 113/Flat, Sealing: Silicone | Request a Quote |
CRPTFEGF25020CMS | FluroPure-G Series Cartridge | Pore Size: 0.20, Length: 2.5", OD: 42mm, Adapter Type: 113/Flat, Sealing: Silicone | Request a Quote |
CRPTFESGJ10020MPS | FluroPure-SG Series Cartridge | Pore Size: 0.20, Length: 1", OD: 56mm, Adapter Type: 118/Flat with 4 bayonet, Sealing: Silicone | Request a Quote |
CRPTFESGJ50020MNS | FluroPure-SG Series Cartridge | Pore Size: 0.20, Length: 5", OD: 56mm, Adapter Type: 116/Flat, Sealing: Silicone | Request a Quote |
Description
JuniPure pleated filter cartridges are suitable for filtration of small batches of fluid, and can provide the PTFE/PES/PP membrane according to the filter medium and usage requirements. The high flow rate hydrophobic PTFE membrane is suitable for filtering gases, corrosive and organic reagent, the hydrophilic PES membrane can be used for water-based reagent filtration. JuniPure filters are widely used in chemical0, semiconductor, pharmaceutical, food and beverage industries, and have lower differential pressure and longer service life.
-
Reliability
Raw materials procurement, transportation, storage, production and product packaging, all operations follow ISO 9001 quality management system. The products are ma545652nufactured and packaged in a 100,000 level cleanroom to ensure product cleanliness. JPF series mini pleated filter cartridges undergo 100% integrity testing before leaving the factory.
-
Compatibility
JuniPure pleated filter cartridge is hot melt welded, and does not contain any adhesive or surfactant. The filter cartridge is composed of PTFE, PES, and PP membranes, as well as food grade PP materials. It has wide chemical compatibility and low extractable levels at high temperatures, and can filter most gases, chemicals, and water-based substances.
-
Economy
The optimized structure can fully utilize the performance of the filter membrane, allowing the filter cartridge to achieve higher efficiency while maintaining the same operating cost, ensuring extremely low initial and operating costs.
-
Regulatory Compliance
ASTM D6394 SP0112
FDA 21 CFR 177.1655
ISO 10993-Part 1, 5
EN 285:2006+A2:2009.
Regulation (EC) No 1935/2004
Features
-
Interpolation is compact and easy to use
-
Proven sterilization efficiency
-
High flow rate, long service life
-
Withstand multiple moist heat sterilization
Applications
-
Sterilizing filtration of compressed air, nitrogen, etc.
-
Filtration of aseptic packaging air
-
Sterilizing filtration of solvents, disinfectants, etc.
-
Sterilizing filtration of biological preparations, culture medium, sterile APIs, antibiotic liquid, etc.
-
Sterilizing filtration of red wine, beer, fruit juice, purified water
Technical Parameters
Materials of Construction |
Filter Membrane |
Hydrophobic PTFE/PP/PES |
Support/Drainage |
PP |
|
Cage/End Cap |
PP |
|
Core |
PP |
|
Adaptor |
PP |
|
O-rings |
S/E/F |
|
Sealed by hot-melt welding, no adhesive |
||
Filter Dimensions
|
Outer Diameter |
J25/J50:56mm F25:42mm |
Length |
2.5inches, 5inches |
|
Filtration Area |
J25≥0.1m2 J50≥0.2m2 F25≥0.045m2 |
|
Operating Conditions |
Maximum Differential Pressure (forward) |
4.2 bar @ 25℃,1.5 bar @ 82℃, 0.5 bar @ 95℃ |
Maximum Differential Pressure (reverse) |
2.1 bar @ 25℃ |
|
|
Steam In-place |
121℃ 30min Differential Pressure<0.3 bar |
Autoclave |
121℃ 30min |
Typical Liquid Flow Rates
Ordering Information
CR |
Filter Membrane |
Length |
Pore Size |
Adaptor |
Seal Material |
PP=polypropylene PTFEG=Hydrophobic PTFE PTFESG=Sterilizing-grade Hydrophobic PTFE PES=Polyethersulfone PESB=Sterilizing-grade PES |
F25=2.5" J25=2.5" J50=5"
|
010=0.10μm 020=0.20μm 045=0.45μm 100=1.00μm 300=3.00μm 500=5.00μm H10=10μm |
M=Internal 116/Flat with bayonet MN= Internal 116/Flat no bayonet CK=External 126/Flat with 2-Flange bayonet PK=Skirt Flange without o-ring CM=External 113 without bayonet (Only for F25)
|
S=Silicone E=EPDM N=Nitrile F=FKM |