
LFH Series High Flow Liquid Filter Housing
Request a QuoteItem No | Product Name | Description | |
---|---|---|---|
LFHVL4001FDN50EM | High Flow Vertical Housing | 316L SS, 40 inch, 1core, Flange DN50, Vertical, Internal pickling and passivation, External sandblasting | Request a Quote |
Description
LFH series hign flow security filter housing is designed and developed for large diameter and high flow rate pipelines, built-in large flow pleated or transversely pleated large flow filter cartridges, which has larger filtration area and is easier and faster to replace the filter cartridge than ordinary melt-blown, string wound or pleated filter cartridges, and has lower operating costs.
By choosing a vertical structure, the footprint of the filtration system can be minimized, while the horizontal structure allows for maximum simplicity in installation and operation. You can choose either vertical or horizontal structure according to your actual needs.
Features
-
Single filter cartridge has large flow and small footprint.
-
The equipment can be vertical or horizontal according to the space.
-
The number of filter cartridge replacement is small, and the replacement is faster, easier and safer.
-
Filtration way of entering from inside to outside, all impurities are retention inside the filter cartridge.
-
Low installation cost and low operating cost.
Technical Parameters
Connection |
Body Connection |
Swing bolt |
Inlet and Outlet |
Flange |
|
Vent |
G1/2" |
|
Drain |
G1" |
|
Material |
Housing Body |
304, 316L |
Vent/Drain |
304, 316L |
|
Swing Bolt |
304 |
|
Feet Support |
304 |
|
Sealing Material |
Silicone Rubber/Viton/EPDM |
|
Surface Finish |
Polish Type |
Mechanical polishing, electro-polishing |
Surface Option |
Internal Ra: 0.4μm, External Ra: 0.6μm |
|
Operating Conditions |
Operating Pressure |
0.7Mpa |
Operating Temperature |
140℃ |
Drawings and Dimensions
*Vertical structure for 40inch
Ordering Information
LFH |
Installation Form |
Material |
Filter Length |
Number of Filters |
Inlet and Outlet Connections |
Inlet / Outlet |
Sealing |
Surface Finish |
H=Horizontal V=Vertical |
S=304ss L=316L |
20=20" 40=40" 60=60" |
01= 1-core 02=2-core 03=3-core 05=5-core 07=7-core 09= 9-core 12=12-core |
K=Tri-Clamp F=Flange S=Screw Thread |
DN20 DN50 DN100 DN200 |
S=Silicone F=FKM E=EPDM |
M=Mechanical polishing E=Electro-polishing |