Micropure Classic Series PP Melt Blown Big Blue Filter Cartridge
Request a Quote| Item No | Product Name | Description | |
|---|---|---|---|
| CRMPP0100050B | PP Melt Blow Big Blue cartridge Filter | 0.5μm, 10 ", Big blue melt blown PP | Request a Quote |
| CRMPP0101000B | PP Melt Blow Big Blue cartridge Filter | 10μm, 10", Big bliu melt blown PP | Request a Quote |
| CRMPP0200100B | PP Melt Blow Big Blue cartridge Filter | 1μm, 20", Big blue melt blown PP | Request a Quote |
| CRMPP0200500B | PP Melt Blow Big Blue cartridge Filter | 5μm, 20", Big blue melt blown PP | Request a Quote |
| CRMPP0301000B | PP Melt Blow Big Blue Cartridge Filter | 10μm, 30", Melt blown PP big blue | Request a Quote |
| CRMPP0305000B | PP Melt Blow Big Blue Cartridge Filter | 50μm, 30", Melt blown PP big blue | Request a Quote |
| CRMPP036100B | PP Melt Blown Big Blue Cartridge Filter | 1μm, 914mm, ID79.38mm, OD114mm, Melt blown PP big blue | Request a Quote |
| CRMPP040010B | PP Melt Blown Big Blue Cartridge Filter | 1μm, 40", OD155mm, ID115mm, DOE, Core | Request a Quote |
| CRMPP040050B | PP Melt Blown Big Blue Cartridge Filter | 5μm, 40", OD: 155, ID:115, DOE, core | Request a Quote |
| CRMPP09755000B | PP Melt Blown Big Blue Cartridge Filter | 50μm, 9.75 ", Big bliu melt blown PP | Request a Quote |
Description
MS® Micropure Classic Series (Big Blue) filter cartridges are made of 100% polypropylene construction, have a large diameter of 4.5" (115mm), no core, and a double opening design to provide better protection for seawater and brackish water reverse osmosis membrane systems.
Features
-
Up to 100% greater dirt holding capacity
-
All PP construction provides wide variety of feed waters and good resistance to organic matter
-
High contaminant removal efficiency
-
Provides lower total cost of filtration operations
-
Long service life
Applications
-
Sea water reverse osmosis pre-filtration
-
Bulk Chemicals
-
Industrial water treatment
-
RO Prefilters
-
Economical depth filtration
-
Water for injection
-
Food & Beverage
-
Cooling water
-
Plating
-
Desalination
-
Drinking water treatment
Technical Parameters
|
Materials of Construction |
Filter Membrane |
PP |
|
Adaptor Type |
DOE |
|
|
Surface Finish |
Silicone/EPDM |
|
|
Filter Dimensions |
Outer Diameter |
4.5" (115mm) |
|
Inner Diameter |
1.1" (28mm) |
|
|
Length |
10-40inches |
|
|
Operating Conditions |
Operating Temperature and PH |
＜82℃; PH 1-13 |
|
Maximum Differential Pressure (without core) |
15psid @ 180°F |
|
|
Recommended Change-out Differential Pressure |
30psid (2Bar) |
Ordering Information
|
CRMPP |
Length |
Pore Size |
Adaptor |
B |
|
010=10" 020=20" 030=30" 040=40" |
0050=0.5μm 0100=1μm 0200=2μm 0500=5μm 1000=10μm 2000=20μm 3000=30μm 5000=50μm |
Blank=DOE |
