MicroPure ®Coreless Series PP Coreless Melt Blown Big Blue Filter Cartridge
Request a Quote| Item No | Product Name | Description | |
|---|---|---|---|
| CRMPP020050BW | PP Melt Blown Cartridge Filter | 5μm, 20", Φ4.5 | Request a Quote |
| CRMPP020100BW | PP Melt Blow Big Blue cartridge Filter | 10μm, 20", Φ4.5 | Request a Quote |
| CRMPP040010BW | OD 155 PP Melt Blown Cartridge Filter | 1μm, 40", OD155mm, ID115mm, No Core | Request a Quote |
| CRMPP040050BW | OD 155 PP Melt Blown Cartridge Filter | 5μm, 40", OD: 155, ID:115, No core | Request a Quote |
| CRMPP0401000BW | PP Melt Blown Cartridge Filter | 40", 10 μm, DOE, OD 152 mm, ID 114 mm | Request a Quote |
| CRMPP040100BW | OD 155 PP Melt Blown Cartridge Filter | 10μm, 40", OD155mm, ID115mm, DOE, No Core | Request a Quote |
| CRMPP040200BW | OD 152 PP Melt Blown Cartridge Filter | 20μm, 40", OD152mm, ID115mm, No Core | Request a Quote |
| CRMPP040400BW | OD 155 PP Melt Blown Cartridge Filter | 40μm, 40", OD155mm, ID115mm, No Core | Request a Quote |
Description
MicroPure Coreless serial is a non-pleated depth filter made of 100% polypropylene melt blown fibers with a 6.0" (152mm) diameter, no core, and double opening design. The large diameter ensures greater filtration area and increases filtration flux, thus reducing the number of cartridges and filters. It has long service life, high flow rate and reduces investment costs. Economical and broad chemical compatibility for most applications.
Features
-
Available in nominal ratings from 1 to 50 microns
-
Fibers are thermally bonded without binders, adhesives and surfactants
-
Available in lengths 20"/40"
-
Triple-zone construction creates a graded pore structure that maximizes dirt holding and filter life
-
Media and construction are optimized to resist unloading of contaminants as pressure differential increases during use
-
Economical depth filtration
Applications
-
Bulk Chemicals
-
Industrial water treatment
-
RO Prefilters
-
Economical depth filtration
-
Water for injection
-
Food & Beverage
-
Cooling water
-
Plating
-
Desalination
-
Drinking water treatment
Technical Parameters
|
Media |
Polypropylene |
|
End Caps |
DOE |
|
Gaskets/O-rings |
NA |
|
Micron Ratings |
1, 5, 10, 20, 50μm |
|
Nominal Length |
20 ", 40 " (50.8, 101.6cm) |
|
Outside Diameter |
6.0 "(152mm) |
|
Inside Diameter |
4.5"(114mm) |
|
Maximum Differential Pressure without Core |
60psid @70°F (4.1Bar @ 30°C) 50psid @ 122°F (3.4Bar @50°C) 30psid @158°F (2Bar @ 70°C) 15psid @180°F (1Bar @ 82°C) |
|
Recommended Change-out Pressure |
30psid (2Bar) |
Typical Liquid Flow Rates
Ordering Information
|
CRMPP |
Length |
Pore Size |
End Configuration |
Diameter |
Core Option |
|
020=20" 040=40" |
0100=1pm 0500=5pm 1000=10μm 2000=20pm 5000=50μm |
Blank=DOE |
B=Big Blue (114/152mm) |
W=Coreless |
