SteriPure-B Series Sterile-grade PES Pleated Filter Cartridge with High Flow Rate and High Efficiency

Request a Quote
Item No Product Name Description
CRPESB0050102E SteriPure-B Series Cartridge Pore Size: 0.10μm, Length: 5inch, OD: 69mm, Adapter Type: 222/Flat, Sealing: EPDM Request a Quote
CRPESB0050456F SteriPure-B Series Cartridge Pore Size: 0.45μm, Length: 5inch, OD: 69mm, Adapter Type: 226/Fin, Sealing: FKM Request a Quote
CRPESB0090201N SteriPure-B Series Cartridge Pore Size: 0.20μm, Length: 9inch, OD: 69mm, Adapter Type: 222/Flat with SS insert, Sealing: NBR Request a Quote
CRPESB0100100S SteriPure-B Series Cartridge Pore Size: 0.10μm, Length: 10inch, OD: 69mm, Adapter Type: DOE, Sealing: Silicone Request a Quote
CRPESB0100202N SteriPure-B Series Cartridge Pore Size: 0.20μm, Length: 10inch, OD: 69mm, Adapter Type: 222/Flat, Sealing: NBR Request a Quote
CRPESB0200103PV SteriPure-B Series Cartridge Pore Size: 0.10μm, Length: 20inch, OD: 69mm, Adapter Type: 222/Fin, Sealing: FEP Encapsulated FKM Request a Quote
CRPESB0200203S SteriPure-B Series Cartridge Pore Size: 0.20μm, Length: 20inch, OD: 69mm, Adapter Type: 222/Fin, Sealing: Silicone Request a Quote
CRPESB0300105S SteriPure-B Series Cartridge Pore Size: 0.10μm, Length: 30inch, OD: 69mm, Adapter Type: 226/Fin with SS insert, Sealing: Silicone Request a Quote
CRPESB0300653S SteriPure-B Series Cartridge Pore Size: 0.65μm, Length: 30inch, OD: 69mm, Adapter Type: 222/Fin, Sealing: Silicone Request a Quote
CRPESB0400202F SteriPure-B Series Cartridge Pore Size: 0.20μm, Length: 40inch, OD: 69mm, Adapter Type: 222/Flat, Sealing: FKM Request a Quote

Description

SPB series PES pleated filter cartridge is made of imported asymmetric PES membrane, which has ultra-low protein binding and dissolution/precipitation level. Its good heat resistance enables the filter cartridge to withstand multiple moist heat sterilization. Batch bacteria challenge guarantees the stable bacteria removal ability of the filter cartridge.

Features

  • Strong chemical compatibility

  • High flux, low protein binding

  • Proven sterile-grade filter cartridge

  • Ultra-low dissolved/precipitated materials

Applications

  • Sterilization filtration of water for injection, cleaning solutions, purified water, deionized water, etc.

  • Sterilization filtration of LVP, APIs, buffers, eye drops, disinfectants, etc.

  • Sterilization filtration of vaccines, serums, biological products, antibiotic water-based liquid, etc.

  • Filtration of red wine, beer, juice, purified water, etc.

Technical Parameters

Materials of Construction

Filter Membrane

PES

Support/Drainage

PP

Cage/End Cap

PP

Core

PP/316L Stainless Steel

Adaptor

PP/PP+Stainless Steel

O-rings

S/E/N/F

Sealed by hot-melt welding, no adhesive

Filter Dimensions

Outer Diameter

69mm

Inner Diameter

33mm

Length

5-40inches

Filtration Area

≥0.32m² (5inches)

≥0.65m²/10inches

Operating Conditions

Maximum Differential Pressure (forward)

5.2 bar @ 25℃,1.9 bar @ 82℃

Maximum Differential Pressure (reverse)

2.1 bar @ 25℃

Biological Safety

Endotoxins

<0.25 EU/mL

Extractables

<40 mg/10 inches

Sterilizable

Steam In-place

121℃ 30min

differential pressure<0.5 bar

Autoclave

121℃ 30min

Quality Control

ISO 9001:2015 quality management system

100% integrity test

Filter cartridge is fully traceable

All materials comply with relevant requirements of CFR21

Bacteria Liquid Challenge Test TR≥1011

Typical Liquid Flow Rates

Ordering Information

CRPESB

Length

Pore Size

Adaptor

Seal Material

Core

005=5"

010=10"

020=20"

030=30"

040=40"

010=0.10μm

020=0.20μm

045=0.45μm

065=0.65μm

080=0.80μm

0=DOE

1=222/Flat with 316L SS insert

2=222/Flat

3=222/Fin

4=222/Fin with 316L SS insert

5=226/Fin with 316L SS insert

6=226/Fin

7=226/Flat

8=226/Flat with 316L SS insert

S=Silicone

E=EPDM

N=Nitrile

F=FKM

Blank=PP

T=Thickened PP

R=Reinforced PP

S=316L Stainless Steel

Related Products