SteriPure-D Series Sterile-grade Double-layer PES Pleated Filter Cartridge with Higher Removal Efficiency
Request a QuoteItem No | Product Name | Description | |
---|---|---|---|
CRPESD0100200S | SteriPure-D Series Cartridge | Medium: PES, Pore Size: 0.20+0.20μm, Length: 10inch, OD: 69mm, Adapter Type: DOE, Sealing: Silicone | Request a Quote |
CRPESD0100205S | SteriPure-D Series Cartridge | Medium: PES, Pore Size: 0.20+0.20μm, Length: 10inch, OD: 69mm, Adapter Type: 226/Fin with SS insert, Sealing: Silicone | Request a Quote |
CRPESD0100206S | SteriPure-D Series Cartridge | Medium: PES, Pore Size: 0.20+0.20μm, Length: 10inch, OD: 69mm, Adapter Type: 226/Fin, Sealing: Silicone | Request a Quote |
CRPESD0200206S | SteriPure-D Series Cartridge | Medium: PES, Pore Size: 0.20+0.20μm, Length: 20inch, OD: 69mm, Adapter Type: 226/Fin, Sealing: Silicone | Request a Quote |
CRPESD0300205S | SteriPure-D Series Cartridge | Medium: PES, Pore Size: 0.20+0.20μm, Length: 30inch, OD: 69mm, Adapter Type: 226/Fin with SS insert, Sealing: Silicone | Request a Quote |
CRPESD0300455S | SteriPure-D Series Cartridge | Medium: PES, Pore Size: 0.45+0.45μm, Length: 30inch, OD: 69mm, Adapter Type: 226/Fin with SS insert, Sealing: Silicone | Request a Quote |
Description
SPD series PES pleated filter cartridge is made of double-layer asymmetric PES membrane. The double-layer sterilizing-grade membrane provides a higher level of sterilization protection. It is suitable for harsh sterile terminal filtration.
Features
-
Strong chemical compatibility
-
High flux, low protein binding
-
Proven sterilizing-grade filter cartridge
-
Higher protection ability of sterilization
Applications
-
Sterilizing filtration of water for injection, cleaning solutions, purified water, deionized water
-
Sterilizing filtration of LVP, APIs, buffers, eye drops, disinfectants, etc.
-
Sterilizing filtration of vaccines, serums, biological products, antibiotic water-based liquid, etc.
-
Filtration of red wine, beer, juice, purified water
-
Sterilizing filtration of syrup and dairy products
Product Assurance
-
ISO 9001:2015 quality management system
-
100% integrity test
-
Filter cartridge is fully traceable
-
All materials comply with relevant requirements of CFR21
-
Bacteria Liquid Challenge Test TR≥1011
Technical Parameters
Materials of Construction |
Filter Membrane |
PES |
Support/Drainage |
PP |
|
Cage/End Cap |
PP |
|
Core |
PP/316L Stainless Steel |
|
Adaptor |
PP/PP+Stainless Steel |
|
O-rings |
S/E/N/F |
|
Sealed by hot-melt welding, no adhesive |
||
Filter Dimensions |
Outer Diameter |
69mm |
Inner Diameter |
33mm |
|
Length |
5-40inches |
|
Filtration Area |
≥0.26m² (5inches) ≥0.55m²/10inches |
|
Operating Conditions |
Maximum Differential Pressure (forward) |
5.2 bar @ 25℃,1.9 bar @ 82℃ |
Maximum Differential Pressure (reverse) |
2.1 bar @ 25℃ |
|
Biological Safety |
Endotoxins |
<0.25 EU/mL |
Extractables |
<40 mg/10 inches |
|
Sterilizable |
Steam In-place |
121℃ 30min differential pressure<0.5 bar |
Autoclave |
121℃ 30min |
Typical Liquid Flow Rates
Ordering Information
CRPESD |
Length |
Pore Size |
Adaptor |
Seal Material |
Core |
005=5" 010=10" 020=20" 030=30" 040=40" |
010=0.10μm+0.10μm 020=0.20μm+0.20μm 045=0.45μm+0.45μm
|
0=DOE 1=222/Flat with 316L SS insert 2=222/Flat 3=222/Fin 4=222/Fin with 316L SS insert 5=226/Fin with 316L SS insert 6=226/Fin 7=226/Flat 8=226/Flat with 316L SS insert |
S=Silicone E=EPDM N=Nitrile F=FKM |
Blank=PP R=Reinforced PP S=316L Stainless Steel |