SIC-U PES Filters
Introduction
MS®SIC-U PES pleated cartridge filters are absolute rated for particle retention. The inherently hydrophilic polyethersulfone membrane and all thermal bonded construction ensure filters no adhesives. The filters are designed for water filtration and aqueous based chemicals filtration.
Features
- Hydrophilic Membrane, No Wetting Agents And Surfactants
- No Pre-Wetting Required
- High asymmetric membrane for high flow rate and long-life time
- 100% Integrity Tested
- Highly cost-effective
Applications
- DI Water Pre-Filter And Post Filter
- High Purity Aqueous Based Chemicals
Specifications
| Materials of Construction | |
| Filter Medium | Asymmetric Polyethersulfone |
| Support/drainage | Polypropylene |
| Inner support core | |
| Outer protection cage | |
| End caps | |
| O-Rings | Silicone/EPDM/Viton |
| Operating Conditions | |
| Maximum operating temperature | 1.5Bar@82℃ |
| Maximum Forward Differential Pressure | 5.5Bar@25℃ |
| Maximum Reverse Differential Pressure | 1.6Bar@25℃ |
| Recommended change-out pressure | 2.4Bar |
| Effective Filter Area | 0.81m² per 254mm (10inch) |
| Extractables | ＜25μg/device |
| Particle shedding cleanliness | ＜15 particles/10ml ≥ 0.2μm @ 5L/min DI water flow |
| TOC recovery | ＜10ppb of feed after 120 L flush @ 1L/min |
Pressure Drop vs. Liquid Flow Rate
Ordering Information
More Cartridge Filter Main Page >>
SIC-P PES Filters
SteriPure-B PES Filters
SteriPure-D PES Filters
SteriPure-P PES Filters
FluorPure PTFE Filters
FluorPure-DLS
FluorPure-LQ
FluorPure-LQS
- USA
- Toll Free: 1-866-528-4572
- Fax: 1-732-412-4040
- China
- Toll Free: 400-820-0293
- Fax: 86-21-51687551
- Japan
- Toll Free: 81-047-710-7392
- Fax: 81-3-6740-1115
