Ø83/Ø130 PF Series PES Pleated Filter Cartridge with High Dirt Holding Capacity for FPD Wet Process
Request a QuoteDescription
The Ø83/Ø130 PF series PES pleated filter cartridge features a naturally hydrophilic and highly asymmetric polyethersulfone filter membrane, providing ultra-high flow rate and long service life. It is ideal for filtering water and water-based chemicals with high flow requirements. The Ø130 series pleated filter cartridge is specially designed for the high flow of the high generation LCD process, with a maximum flow rate exceeding 300L/min.
Features
-
2-4x longer service life than ordinary pleated filter cartridges
-
Ideal for high-flow chemical filtration
-
Available in two sizes to fit specific needs
-
Clean room production with no pollution from hot-melt welding technology
Applications
-
wet process water filtration
-
chemical liquid filtration
-
substrate cleaning filtration
Technical Parameters
Materials of Construction |
Specifications |
Ø83 |
Ø130 |
Filter Membrane |
PES |
||
Support/Drainage |
PP |
||
Cage/End Cap |
PP |
||
Core |
PP/316L Stainless Steel |
||
Adaptor |
PP/PP+Stainless Steel |
||
Removal Ratings |
0.05μm,0.1μm,0.22μm,0.45μm,0.65μm,1.0μm,3.0μm,5.0μm,10.0μm |
||
Dimensions
|
Outer Diameter |
83mm |
130mm |
Length |
10 inches |
||
Filtration Area |
≥1.2m² |
≥2.4m² |
|
Operating Conditions |
Maximum Differential Pressure (forward) |
4.2 bar @ 25℃ |
|
Maximum Differential Pressure (reverse) |
2.4 bar @ 25℃ |
Dimensions
Typical Liquid Flow Rates
Ordering Information
CRPF |
Length |
Pore Size |
Adaptor |
Sealing Material |
C10=10”/Ø83 H10=10”/Ø130 |
005=0.05μm 010=0.1μm 020=0.2μm 045=0.45μm 065=0.65μm 100=1.0μm 300=3.0μm 500=5.0μm H10=10.0μm |
Q=222/Flat R=226/Flat G=334/Flat |
S=Silicone E=EPDM F=Fluororubber N=Nitrile PV=FEP Encapsulated FPM/FKM PS=FEP Encapsulated Silicone |