Products
-
Ø83/Ø130 CF Series-Hydrophobic PTFE Pleated Filter Cartridge with High Dirt Holding Capacity for FPD Wet Process
Ask for quote -
Ø83/Ø130 CL Series Hydrophilic PTFE Pleated Filter Cartridge with High Dirt Holding Capacity for FPD Wet Process
Ask for quote -
FluorPure-DG Series Double-layer PTFE Pleated Filter Cartridge for GMP Gas Sterile Filtration Requirements
Ask for quote -
FluorPure-SG Series PTFE Pleated Filter Cartridge for GMP Gas Sterile Filtration Requirements
Ask for quote -
FluorPure-L Series Hydrophilic PTFE Pleated Filter Cartridge with High Flow Rate and Strong Chemical Compatibility
Ask for quote -
FluorPure-BG Series Cost-effective PTFE Pleated Filter Cartridge for GMP Gas Sterile Filtration Requirements
Ask for quote -
FluorPure-EV Hydrophobic All Fluorine Filter Cartridge with PVDF Cage
Ask for quote -
FluorPure-G Series Hydrophobic PTFE Pleated Filter Cartridge with Extremely Strong Chemical Compatibility
Ask for quote -
AfsPure All Fluorine Pleated
Ask for quote -
UltiPure All Fluorine Filter Cartridge with High Flow Rate and High Cleanliness
Ask for quote -
Wet-Fluoride Series All Fluorine Filter Cartridge(All Fluorine Filter Cartridge for SEMI Wet Process)
Ask for quote -
Wet-Mega Series-PTFE Pleated Filter Cartridge with PP Cage for SEMI Wet Process
Ask for quote -
Wet-Vast Series-PTFE Pleated Filter Cartridge with HDPE Cage for SEMI Wet Process
Ask for quote
Description
MS polytetrafluoroethylene (PTFE) pleated filter cartridge is made of high-porosity hydrophobic PTFE membrane, which has the characteristics of high flux and long service life. Its wide chemical resistance makes PTFE filter cartridge especially suitable for sterilizing filtration of various low surface tension chemicals and gases, and hydrophilic polytetrafluoroethylene pleated filter cartridges can be provided, which can be used for filtration of various strong acid and alkali solutions without wetting.
MS polytetrafluoroethylene (PTFE) series filter cartridges, combined with different local application scenarios, have refined their configurations to form different sub-series to meet the needs of different customers for products, such as FluorPure -G, FluorPure-SG and Wet-Fluoride, etc. Each series has different characteristics and applications, and we can choose the appropriate PTFE pleated filter cartridge for you according to your needs.
Features
-
High porosity PTFE membrane
-
High flux and retention efficiency
-
Extensive chemical resistance, strong acid and alkali resistance, good high temperature resistance
-
Hydrophilic and hydrophobic membranes are available
-
100% integrity test before delivery
Applications
-
Fermentation tanks, storage tanks, etc. aseptic exhaust, venting filtration
-
Electronic industry high purity gas filtration
-
High purity steam filtration
-
Clarification filtration of corrosive chemicals
-
Chemical solvent filtration
Specifications
Materials of Construction | |
Filter Medium | Expanded PTFE (polytetrafluoroethylene) |
Support and drainage | PP |
Inner support core | |
Outer protection cage | |
End caps | |
O-Rings | Please refer to ordering information |
Recommended Operating Conditions | |
Maximum Temperature | 168℉ (80℃) |
Maximum Pressure | 58psi (4bar)@ 70℉ (21℃) |
Particle Removal Ratings(Nominal, μm) | 0.03, 0.05, 0.1, 0.22, 0.45, 1.0 |
Effective Filtration Area: (10inch) | 7.54ft²/10”in length (0.7m²/250mm) |
Construction | |
---|---|
Filter Media | PTFE Membrane |
Support Media | Polypropylene Fiber |
Inner Core | High Strength Polypropylene |
Outer Core | High Strength polypropylene |
End Caps | High Strength Polypropylene |
O Ring / Gaskets | EPDM / Silicone / Fl Rubber |
Pressure Drop vs. Liquid Flow Rate
Order Information
More Cartridge Filter Main Page >
FluorPure-DLS
FluorPure-LQ
FluorPure-LQS
FluorPure-HP PTFE Filters
FluorPure-EV PTFE Filters
FluorPure-E PTFE Filters
AFS-Pure PFA Filters