PolyPure-Classic Series PP Pleated Filter Cartridge with High Flux and High Flow Rate

Request a Quote
Item No Product Name Description
CRPP0050106S PolyPure-Classic Cartridge Filters Pore Size:0.1μm, Length: 5inches, 226/Fin, Silicone Request a Quote
CRPP0050450S PolyPure-Classic Cartridge Filters Pore Size:0.45μm, Length:5inches, Silicone, DOE Request a Quote
CRPP0100100E PolyPure-Classic Cartridge Filters Pore Size:0.1μm, Length: 10inches, EPDM, DOE Request a Quote
CRPP0100223F PolyPure-Classic Cartridge Filters Pore Size:0.20μm, Length:10inches, FKM, 222/Fin Request a Quote
CRPP0101000N PolyPure-Classic Cartridge Filters Pore Size:1.0μm, Length:10inches, Nitrile, DOE Request a Quote
CRPP0200100E PolyPure-Classic Cartridge Filters Pore Size:0.1μm, Length: 20inches, DOE, EPDM Request a Quote
CRPP0200203P PolyPure-Classic Cartridge Filters Pore Size:0.20μm, Length:20inches, 222/fin, FKM encapsulated Silicone Request a Quote
CRPP0300200F PolyPure-Classic Cartridge Filters Pore Size:0.22μm, Length:30inches, FKM, DOE Request a Quote
CRPP040H106E PolyPure-Classic Cartridge Filters Pore Size:10μm, length:40inches, Adapter Type:226/Fin, Sealing:EPDM, Core:Polypropylene Request a Quote
CRPP0505003E PolyPure-Classic Cartridge Filters Pore Size:5.0μm, Length:50inches, EPDM, 222/Fin Request a Quote

Description

PPC series PP pleated filter cartridge is made of high fluffy polypropylene filter material, which has the characteristics of high flow rate and high dirt holding capacity. It has excellent cost performance as clarification filter and pre-filter. The full PP structure enables the filter cartridge to be applied to the filtration of various acid and alkali and organic solvents.

PolyPure Classic filters offer economical solutions for a variety of requirements with its excellent filtration efficiency and chemical compatibility across a wide range of liquid process applications. The filter is constructed of pleated polypropylene filter media with high surface area which allows for greater system flow rate. The construction utilizes hot melt welding techniques to seal all components and therefore eliminating extractable and optimizing cartridge.

Features

  • Extensive chemical compatibility

  • High efficiency, high flux, low pressure drop, long service life

  • High efficiency particle retention rate to protect terminal filter sterilization safety

  • No fiber shedding

Applications

  • Filtration of colloidal products

  • Filtration of fermentation broth and high viscosity materials

  • Prefiltration of culture media and blood products

  • Filtration of chemical intermediates, organic solvents, pure water

  • Filtration of process water

  • Filtration of bottled water, liquor, beverages, dairy products

  • RO prefilters

  • Industrial water treatment

  • Water for injection

  • Cooling water

  • Desalination

  • Drinking water treatment

Product Assurance

  • ISO 9001:2015 quality management system

  • Filter cartridge is fully traceable

  • All materials comply with relevant requirements of CFR21

Technical Parameters

Materials of Construction

Filter Membrane

PP

Support/Drainage

PP

Cage/End Cap

PP

Core

PP/316L Stainless Steel

Adaptor

PP/PP+Stainless Steel

O-rings

S/E/N/F

Sealed by hot-melt welding, no adhesive

Filter Dimensions

Outer Diameter

69mm

Inner Diameter

33mm

Length

5-40inches

Filtration Area

≥0.25m² (5inches)

≥0.52m²/10inches

Operating Conditions

Maximum Differential Pressure (forward)

5.2 bar @ 25℃，1.9 bar @ 82℃

Maximum Differential Pressure (reverse)

2.1 bar @ 25℃

Biological Safety

Endotoxins

＜0.25 EU/mL

Extractables

＜40 mg/10 inches

Sterilizable

Steam In-place

121℃ 30min

differential pressure＜0.3 bar

Autoclave

121℃ 30min

Typical Liquid Flow Rates

Ordering Information

CRPP

 

Length

Pore Size

Adaptor

Seal Material

Core

005=5"

010=10"

020=20"

030=30"

040=40"

010=0.10μm

020=0.20μm

045=0.45μm

100=1.0μm

300=3.0μm

500=5.0μm

H10=10μm

H20=20μm

H30=30μm

H50=50μm

0=DOE

1=222/Flat with SS insert

2=222/Flat

3=222/Fin

4=222/Fin with SS insert

5=226/Fin with SS insert

6=226/Fin

7=226/Flat

8=226/Flat with SS insert

S=Silicone

E=EPDM

N=Nitrile

F=FKM

Blank=PP

R=Reinforced PP

S=316L Stainless Steel

Related Products

PolyPure-AB Series PP Pleated Filter Cartridge with Higher Removal Efficiency

PolyPure-Classic Series PP Pleated Filter Cartridge with High Flux and High Flow Rate

PolyPure-D Series Multi-layer PP Pleated Filter Cartridge with Long Service Life