ProtecPure GlassFiber Pleated Filter Cartridge with High Retention Efficiency and High Dirt Holding Capacity
Request a Quote| Item No | Product Name | Description | |
|---|---|---|---|
| CRGF0050204S | ProtecPure Series Cartridge | Pore Size:0.20μm, length:5inch, Adapter Type:222/Fin with SS insert, Sealing:Silicone, Core:Polypropylene | Request a Quote |
| CRGF0100206E | ProtecPure Series Cartridge | Pore Size:0.20μm, length:10inch, Adapter Type:226/Fin, Sealing:EPDM, Core:Polypropylene | Request a Quote |
| CRGF0101006F | ProtecPure Series Cartridge | Pore Size:1.0μm, length:10inch, Adapter Type:226/Fin, Sealing:FKM, Core:Polypropylene | Request a Quote |
| CRGF0201006N | ProtecPure Series Cartridge | Pore Size:1.0μm, length:20inch, Adapter Type:226/Fin, Sealing:NBR, Core:Polypropylene | Request a Quote |
| CRGF0202000PV | ProtecPure Series Cartridge | Pore Size:2.0μm, length:20inch, Adapter Type:DOE, Sealing:FEP Encapsulated FKM, Core:Polypropylene | Request a Quote |
| CRGF0300456S | ProtecPure Series Cartridge | Pore Size:0.45μm, length:30inch, Adapter Type:226/Fin, Sealing:Silicone, Core:Polypropylene | Request a Quote |
| CRGF0301005E | ProtecPure Series Cartridge | Pore Size:1.0μm, length:30inch, Adapter Type:226/Fin with SS insert, Sealing:EPDM, Core:Polypropylene | Request a Quote |
| CRGF0400450N | ProtecPure Series Cartridge | Pore Size:0.45μm, length:40inch, Adapter Type:DOE, Sealing:NBR, Core:Polypropylene | Request a Quote |
| CRGF0401006S | ProtecPure Series Cartridge | Pore Size:1.0μm, length:40inch, Adapter Type:226/Fin, Sealing:Silicone, Core:Polypropylene | Request a Quote |
| CRGFJ20300ME | ProtecPure Series Cartridge | Pore Size:0.3μm, Length:2inch, 116 Internal O-ring, EPDM | Request a Quote |
Description
ProtecPure GF filters are designed for providing excellent protection to downstream filters. Glass microfiber layer has a unique three dimensional structure. It can provide high dirt holding capacity and high removal effect. GF filters are suitable for retaining colloidal matter from high burden and high viscosity fluid.
Applications
-
Remove particles from viscous liquids
-
Lipids and colloids removal
-
Bio-burden removal
-
Clarify product to extend the lifetime of membrane filters
Product Assurance
-
ASTM F838-83
-
FDA 21 CFR 177
-
ISO 10993-Part 1, 5
-
EN 285:2015
-
Regulation (EC) No 1935/2004
Technical Parameters
|
Materials of Construction |
Filter Membrane |
Glass Fiber |
|
|
Support |
PP |
||
|
Cage/End Cap |
PP |
||
|
Core |
PP |
||
|
Adaptor |
PP |
||
|
O-rings |
Silicone/EPDM |
||
|
Filter Dimensions |
Outer Diameter |
68.5mm |
|
|
Inner Diameter |
33.0mm |
||
|
Filtration Area |
0.8μm |
≥0.35m² |
|
|
1μm |
≥0.41m² |
||
|
3~10μm |
≥0.44m² |
||
|
Operating Conditions |
Maximum Operating Temperature |
1.9 bar @ 82℃ |
|
|
Maximum Differential Pressure (forward) |
5.2 bar @ 25℃ |
||
|
Maximum Differential Pressure (reverse) |
2.1 bar @ 25℃ |
||
|
Recommended Change-out Differential Pressure |
2.4 bar |
||
|
Sterilization Conditions |
Hot Water Disinfection |
85℃, 60min |
|
|
Autoclave |
124℃, 30min |
||
|
Steam In-place |
124℃, 30min |
||
Ordering Information
|
Filter Media |
Length |
Pore Size |
Adaptor |
Seal Material |
Core |
|
CRGF: Glass Fiber |
005=5inches 010=10inches 020=20inches 030=30inches 040=40inches |
080=0.8μm 100=1.0μm 300=3.0μm 500=5.0μm 1000=10.0μm |
0=DOE 2=222/Flat 3=222/Fin 5=226/Fin with SS insert 6=226/Fin 7=226/Flat |
S=Silicone E=EPDM |
Blank=PP S=Stainless Steel P=Polysulfone |
