MS InnerPure Pleated Filter Cartridge with High Flow

Item No	Product Name	Description
CRHSPP010500EDN	InnerPure Cartridge Filter	Filter Media：PP, 10inch, 5μm, EPDM seal, Outer net：Polypropylene, Double O-ring	Request a Quote
CRHSPP0401000EN	InnerPure Cartridge Filter	Filter Media：PP, 40inch, 10μm, EPDM seal, outer net：Polypropylene, Single O-ring	Request a Quote
CRHSPP040500EC	InnerPure Cartridge Filter	Filter Media：PP, 40inch, 5μm, EPDM seal, Outer Layer：Polypropylen, Single O-ringe	Request a Quote

Description

MS InnerPure cartridge filter is a replacement cartridge for conventional depth filters. Up to 1300 LPM flow rate per 40inch length filter reduces the number of filter cartridges and cost of housing required. Pleated construction with an outside to inside flow provides maximum flow rates with the lowest possible pressure drop. Because of the larger filter area, you can achieve significantly increased filter life and fewer filter change-outs, saving cartridge costs and labor.

Features

Excellent space-saving benefits
High flow capacity means fewer cartridges and reduced labor costs associated with change-out
Inner O-ring design ensure the filtration efficiency
It is available in a variety of filter media to meet industry standards and chemical compatibility
Cartridge is 100% thermally welded

Applications

Prefiltration of RO, Pretreatment of sea water desalination
Condensed water treatment for power plant
The filtration of bottled water, soft drinks and other beverage
Microelectronics, films, fiber and resin

Technical Parameters

Materials of Construction	Filter Material	Deep pleated polypropylene, pleated glass fiber
	Support/Drainage	PP/Polyester net
	End Cap	Glass fiber reinforced polypropylene
	O-ring	EPDM
Filter Dimensions	Outer Diameter	6"（152mm）
	Inner Diameter	3.5"（89mm）
	Length	20";40";60"
	Filtration Area	4.5㎡@40"
Recommended Performance Parameters	Maximum Operating Temperature	Deep pleated polypropylene：82℃ Resin synthetic glass fiber：121℃
	Maximum Operating Pressure	Deep pleated polypropylene：3.4 bar@82℃ Resin synthetic glass fiber：3.4 bar@121℃
	Recommended pressure difference for filter cartridge replacement	2.4 bar@20℃
	Flow Direction	Outside to Inside

High Flow Dimensional Drawing

Ordering Information

CRHS

Filter Material

Length

Removal Ratings

O-ring

Sealing

Cage

PP=Polypropylene

GF=Glass Fiber

020=20"

040=40"

060=60"

100=1μm

300=3μm

500=5μm

1000=10μm

2000=20μm

5000=50μm

7000=70μm

E=EPDM

D=Double O-ring

Blank=Single O-ring

C=Polypropylene

N=Polyester net

*This ordering information is a guide for selecting filter cartridge specifications. For other special connections or installation details, please contact MS.