PolyPure Calssic-W filters are 100% polypropylene construction offers higher dirty hold capacity. It offers better protection of RO membrane system for seawater and brackish water. It is designed to reduce overall filtration costs when compared to spun bonded, string wound and nominally-rated pleated cartridges. All cartridge hardware components are high purity polypropylene materials for use in critical process applications. PolyPure Calssic-W cartridges are manufactured and assembled in a clean room environment to minimize the possibility of contamination. PolyPure Calssic-W Series cartridges are available in a wide range of configurations to fit most commercially available filter housings.
Construction | |
Filter Medium | Polypropylene |
Inner support core | Polypropylene nonwoven and net |
Outer protection cage | Polypropylene |
End caps | |
Cartridge Dimensions | |
Micron ratings | 0.1μm~100μm |
Outer diameter | 69±1mm |
Operating Conditions | |
Maximum Allowable Differential Pressure | 58psi (4bar) @ 70℉ (21℃) |
Maximum recommended operating Temperature | 158℉ (70℃) |
Seal Materials | |
Seal Material | Viton, Silicone, EPDM, NBR |
Construction Method | Weld (No adhesives) |
Polypure Classic PP Cartridge Filter
Polypure AB PP Cartridge Filter
600 FlowPure-HF
Melt Blown Cartridge Filter
Wound Cartridge Filter