PolyPure®XL PP Pleated Cartridge Filter
Request a QuoteIntroduction
MS® PolyPure XL Pleated polypropylene Cartridges are chemically compatible for a broad range of application. Each 10-inch equivalent length cartridge is constructed with 9.5 square feet of media. The cartridge uses unique M structure pleat geometry which ensures large filtration areas.
The filter’s unique M structure combined with high membrane layer means fewer filter elements are required for a given flow rate when compared to standard cartridges.
Features
- 100% polypropylene construction provides wide chemical compatibility
- Graded density filtration media enhances dirt-holding capacity
- Free of surfactants, binders and adhesives
- Consistent filter performance
- Low pressure drop
Applications
- Microelectronics, Chemical solvents
- RO Pretreatment
- Food and Beverage Processing
- Cooling water
- Process water
- Paints and coatings
Specifications
| Construction | |
| Media | Polypropylene |
| End Connector | Polypropylene |
| Cartridge Dimensions | |
| Micron ratings | 0.45μm, 1μm, 3μm, 10μm, 20μm |
| Length | 10'' 20'' 30'' 40'' 50'' 60'' 70'' |
| Operating Conditions | |
| Max Forward Differential Pressure |
75 psid (5 bar) @ 20° 29psid (2 bar) @ 80° C |
| Reccomended change out Differential Pressure | 35psid(2.4bar) |
| Max Operating Temperature | 120° C |