Ø83/Ø130 PPD Series PP Pleated Filter Cartridge with High Dirt Holding Capacity for FPD Wet Process
Request a QuoteItem No | Product Name | Description | |
---|---|---|---|
CRPPDC10300RE-E | PolyPure-D Series Cartridge | Pore Size: 3μm, Length: 10 inch, 226/Flat, EPDM | Request a Quote |
CRPPDC10450RE-E | PolyPure-D Series Cartridge | Pore Size: 4.5μm, Length: 10 inches, 226/Flat, EPDM | Request a Quote |
CRPPDC10500RE-E | PolyPure-D Series Cartridge | Pore Size: 5.0μm, Length: 10 inches, 226/Flat, EPDM | Request a Quote |
CRPPDC10H30RE-E | PolyPure-D Series Cartridge | Pore Size: 30μm, Length: 10 inches, 226/Flat, EPDM | Request a Quote |
CRPPDH10020GE-E | PolyPure-D Series Cartridge | Pore Size: 0.20μm, Length: 10 inches, 334/Flat, EPDM | Request a Quote |
CRPPDH10050GE-E | PolyPure-D Series Cartridge | Pore Size: 0.50μm, Length: 10 inches, 334/Flat, EPDM | Request a Quote |
CRPPDH10100GE-E | PolyPure-D Series Cartridge | Pore Size: 1.0μm, Length: 10 inches, 334/Flat, EPDM | Request a Quote |
CRPPDH10200GE | PolyPure-D Series Cartridge | Pore Size: 2.0μm, Length: 10 inches, 334/Flat, EPDM | Request a Quote |
CRPPDH10H10RE | PolyPure-D Series Cartridge | Pore Size: 10.0μm, Length: 10 inches, 334/Flat, EPDM | Request a Quote |
CRPPDH10H20GE | PolyPure-D Series Cartridge | Pore Size: 20μm, Length: 10 inches, 334/Flat, EPDM | Request a Quote |
Description
Ø83/Ø130 PPD series adopts multi-layer gradient polypropylene fiber filter material, which combines the advantages of depth filtration and pleated filtration, so that the filter cartridge has high dirt holding capacity and high retention efficiency at the same time. And the Ø130 series pleated filter cartridge is specially designed for the high flow of the high generation LCD process, which can handle a flow rate exceeding 300L/min. The all polypropylene structure makes the PPD series pleated filter cartridges suitable for clarification filtration of various high-load chemicals.
Features
-
The service life is twice that of ordinary pleated filter cartridges, reducing the frequency of replacement and reducing the costs of use
-
Especially suitable for filtration of high-flow chemicals
-
Available in two sizes
-
Cleanroom production, using hot-melt welding technology, no pollution
Applications
-
Wet process water filtration
-
Chemical liquid filtration
-
Substrate cleaning filtration
Technical Parameters
Materials of Construction |
Type |
Ø83 |
Ø130 |
Filter Membrane |
PP |
||
Support/Drainage |
PP |
||
Cage/End Cap |
PP |
||
Core |
PP/316L Stainless Steel |
||
Adaptor |
PP/PP+Stainless Steel |
||
Removal Ratings |
0.05μm,0.1μm,0.22μm,0.45μm,0.65μm,1.0μm,3.0μm,5.0μm,10.0μm |
||
Dimensions
|
Outer Diameter |
83mm |
130mm |
Length |
10 inches |
||
Filtration Area |
≥0.52m² |
≥1.1m² |
|
Operating Conditions |
Maximum Differential Pressure (forward) |
4.2 bar@ 25℃ |
|
Maximum Differential Pressure (reverse) |
2.4 bar@ 25℃ |
Typical Liquid Flow Rates
Dimensions
Φ83 PPD series (222/Flat)
Φ83 PPD series (226/Flat)
Φ130 PPD series
Ordering Information
CRPPD |
Length |
Pore Size |
Adaptor |
Sealing |
C10= 10〞/Ø83 H10= 10〞/Ø130 |
005=0.05μm 010=0.1μm 020=0.2μm 045=0.45μm 065=0.65μm 100=1.0μm 300=3.0μm 500=5.0μm H10=10.0μm |
Q=222/Flat R=226/Flat G=334/Flat |
S=Silicon E=EPDM F=FKM N=Nitrile PV=FEP Encapsulated FPM/FKM PS=FEP Encapsulated Silicone |