FluorPure®-EV PTFE Cartridge Filter
Introduction
FluorPure®-EV filters using expanded PTFE membranes along with ECTFE net support and PVDF components can be used for most critical chemicals and high temperature. FluorPure®-EV filters have better corrosion resistance than PP and cost less than PFA, can be wild used in electronic industry, pharmaceutical industry, as well as the special application environment.
Features
- Excellent Chemical Compatibility
- Longer Service Time
Applications
- Photoresist filtering
- Corrosive chemical reagent
- Mixed corrosive acid
- Oxide gas or liquid filtration
Quality
- FDA Listed Materials
- ISO 9001 Certified Quality System
- Meets USP Class VI (121℃) Biological Safety Test for Plastics
- 100% integrity tested
- Clean room manufacturing environment
- LVR ≥ 7
Specifications
|
Materials of Construction |
|||
|---|---|---|---|
|
Media |
Polytetrafluoroethykene |
||
|
Support/drainage |
ECTFE |
||
|
Cage/End Caps |
PVDF |
||
|
Core |
PVDF |
||
|
Adapter |
PVDF |
||
|
O-Rings/Gaskets |
Teflon Encapsulated fluoroelastomer |
||
|
Operating Conditions |
|||
|
Maximum operating temperature |
1.9Bar@150℃ |
||
|
Maximum Forward Differential Pressure |
5.2Bar@25℃ |
||
|
Maximum Reverse Differential Pressure |
3.4Bar@25℃ |
||
|
Recommended change-out pressure |
2.4Bar |
||
|
Dimension |
|||
|
Outside/Inner diameter |
68.5mm/33.0mm |
||
|
Lengths |
5″,10″, 20″, 30″, 40″ |
||
|
Effective Filter Area |
0.65m² per 254mm (10inch) |
||
|
Sterilization |
|||
|
Autoclave |
40 x 60min @140℃ |
||
|
Steam In-Place (forward, 0.3bar) |
100 x 60min @126℃; 40 x 60min @140℃ |
||
Pressure Drop and Flow Rate
- Unit conversion: 1bar=100kpa
- Flow rate is for a 25.4cm (10inch), cartridge. For liquids other than water, multiply differential pressure by fluid viscosity (cP)
Ordering Information
|
Example: CRPTEVL0100206P |
|||||
|
Filter Media |
Type |
Length |
Pore Size |
Adaptor |
Sealing |
|
CRPT: Polytetrafluoroethylene |
EVL: Hydrophilic EVG:Hydrophobic |
005 = 5 inch 010 = 10 inch 020 = 20 inch 030 = 30 inch 040 = 40 inch |
005 = 0.05μm 010 = 0.1μm 020 = 0.22μm 040 = 0.45μm 100 = 1.0μm |
0 = DOE 2 = 222/Flat 3 = 222/Fin 6 = 226/Fin 7 = 226/Flat |
P=PFA Encapsulated fluoroelastomer |
