FluorPure-LQ PTFE Cartridge Filter
Request a QuoteIntroduction
MS®FluorPure-LQ PTFE cartridge filter uses a surface-modified PTFE membrane which have no pre-wetting and been designed for almost all pharmaceutical liquids. This cartridge is the common type of the hydrophilic PTFE cartridge filter, can be widely used in the liquid contained water or solvent in pharmaceutical industry, food and beverage industry.
Features
- Hydrophilic PTFE with lowest gravimetric extracts, no pre-wetting
- High flow rates and low pressure drop
- Good compatibility, wide range of applications
- Integrity tested and high removal efficiency and low adsorption
Applications
- Liquid contained water or solvent
- Water for injection
- Buffer and bioprocess
- Antibiotics, disinfectant, mundificant
- Ophthalmic solutions
Quality Guarantee
- FDA Listed Materials
- ISO 9001 Certified Quality System
- Meets USP Class VI Biological Test for Plastics
- 100% integrity tested
Specifications
| Materials of Construction | |
| Media | Hydrophilic Polytetrafluoroethylene |
| Support/drainage | Polypropylene |
| Cage/End Caps | |
| Core | |
| Adapter | |
| O-Rings/Gaskets | Please refer to ordering information |
| Dimension | |
| Outside diameter | 68.5mm |
| Lengths | 5”, 10″, 20″, 30″, 40″ |
| Effective Filter Area | 0.7m² per 254mm (10inch) |
| Operating Conditions | |
| Maximum operating temperature | 1.9Bar@82℃ |
| Maximum Forward Differential Pressure | 5.2Bar@25℃ |
| Maximum Reverse Differential Pressure | 2.1Bar@25℃ |
| Recommended change-out pressure | 2.4Bar |
| Endotoxins | ≤0.25EU/ml |
| Steam sterilization | 121℃/30min |
Pressure and Flow Rate
Ordering Information
More Cartridge Filter Main Page >>
FluorPure PTFE Filters
FluorPure-DLS
FluorPure-LQS
FluorPure-HP PTFE Filters
FluorPure-EV PTFE Filters
FluorPure-E PTFE Filters
AFS-Pure PFA Filters