
Quartz Fiber Filter
Request a QuoteProduct Description

Cross Reference
Company
|
Membrane Solutions
|
Whatman
|
Millipore
|
Advantec
|
Type
|
QF
|
QM-A
|
AQFA
|
QR-100
|
Features
- Heat treated for reduction of trace organics and superior chemical purity
- Filters made of pure quartz micro fiber (SiO2), free of binding elements or additives
- Higher resistance than glass micro fiber. Very good up to 900 ºC
- Enables to pass through large volumes of air
- Binder-free
- High filtration efficiency
- Biologically inert with highest chemical and thermal resistance
Application
- High temperature and hot gas air monitoring applications
- Applications that require a maximum filter purity with a low metal content and no carbon traces
- Sampling and analysis of PM 10 particles and other pollutants
- Pollution controls performed on air in industrial stacks, smoke ducts and aerosols
Technical Parameter
Weight(g/m2) | Thickness (μm) |
Gas Collection Efficiency Drop (%) at 0.3 μm |
Binder |
Maximum Operating Temperature (°C) |
pH in Boiled Water Extract |
Diameter |
85 | 0.432 | 99.998 | No | 900 | 6.5 - 7.5 | 25—293, 8”×10” |
Typical Levels of Trace Elements(PPM) | ||||||||||||||||
Al | Ba | Ca | Cd | Co | Cr | Cu | Fe | Mg | Mn | Na | Ni | Pb | Sr | Ti | V | Zn |
300 | 10 | 250 | 0.002 | <0.5 | 2 | 2 | 50 | 25 | 2 | 100 | 2 | <1 | 3 | <1 | <5 | 6 |