MS production of extruded activated carbon filter is made of high quality activated carbon particles as the filter medium, activated carbon particles and food-grade additives are continuously extruded and formed one filter. Activated carbon extrusion process, we can ensure that more carbon composition in the filter medium and has a low pressure drop. Extruded activated carbon filter is used in water treatment equipment to remove residual chlorine of water, chemicals, different color, odor, and subtle impurities, etc., in the pure water machine, it is used to protect the RO membrane as the third level, the service life is 3 ~ 6 months.
Both inside and outside of extruded activated carbon filter are wrapped by a layer of non-woven fabric, in order to ensure that the filter itself does not have carbon powder migration. Both ends of the filter equipped with rubber gasket which make the filter have good sealing.
|Items||Extruded Activated Carbon Filter|
|Filter Medium||Coal Activated Carbon|
|Outside Diameter||64mm, 68mm, 114mm|
|Inside Diameter||28mm, 30mm|
|Length||9.75”, 9.87”, 10” ,20”|
|End caps Medium||Polypropylene|
|Removal Ratings||1μm, 5μm, 10μm|
|Maximum Differential Pressure||7.0Bar|
|Maximum Operation Temperature||52℃|
|Methylene Blue Adsorption||＞120 mg/g|
|Residual Chlorine Removal Rate||＞92%|
|Iodine Adsorption Rate||＞800mg/g|
|COD Removal Rate||＞40%|