SCGH Series Single Core Gas Filter Housing

Request a Quote
Item No Product Name Description
SCGH01L056KKDN15SM Single Core Gas Filter Housing 316L , 1Core, 5inch, 226/Fin, Tri-clamp, Inlet/Outlet DN15 Clamp, Silicon O-ring, Mechanical Polishing Request a Quote
SCGH01L056KKDN20SM Single Core Gas Filter Housing 316L , 1Core, 5inch, 226/Fin, Tri-clamp, Inlet/Outlet DN20 Clamp, Silicon O-ring, Mechanical Polishing Request a Quote
SCGH01L056KKDN25SM Single Core Gas Filter Housing 316L , 1Core, 5inch, 226/Fin, Tri-clamp, Inlet/Outlet DN25 Clamp, Silicon O-ring, Mechanical Polishing Request a Quote

Description

SCGH series precision gas filter housing is a kind of precision filtration equipment with simple structure, high efficiency and easy maintenance. It is mainly used in high-purity gas removal of impurity particles and sterilization filtration and other working condition filter housings. The filter housing can be manufactured according to pressure vessel GB150-2011 or ASME standard.
Working principle of gas filter housing: The airflow enters the equipment from the inlet, and the filter cartridge support tube distributes the airflow evenly, the flow rate is greatly reduced, and the large impurities are roughly separated and settled to the bottom of the filter housing. After the airflow passes through the filter cartridge, the impurities larger than the separation precision are captured by the filter cartridge, and the purified airflow flows out of the filter housing from the outlet.

Features

  • Designed and manufactured in strict accordance with gas filtration standard, all adopts national standard flanges to ensure safety.

  • Can be used to remove solid impurities in gases, water, oil components and sterile grade filtration standard.

  • The filter cartridge adopts 226 double O-ring snap-in adaptor to ensure the sealing performance and rigidity of the filter cartridge.

  • Meticulous detail design enhances the convenience of operation and maintenance.

  • Compact and reasonable structure design of filtration equipment, small footprint, easy installation.

Technical Parameters

Connection

Body Connection

Flange/Tri-clamp

Inlet and Outlet

Flange/Tri-clamp

Drain

G1/4",G1/2" Male thread

Material

Housing Body

304, 316L

Through Screw

304

Feet Support

304

Sealing Material

Silicone Rubber/Viton/EPDM/PFA

Surface Finish

Polish Type

Mechanical polishing, electro-polishing

Surface Option

Internal/External Ra: 0.6μm

Operating Conditions

Operating Pressure

1.0Mpa

Operating Temperature

150℃

Ordering Information

SCGH

Number of Filters

Material

Filter Length

Filter Cartridge Adaptor

Inlet and Outlet Connections

Inlet / Outlet

Sealing

Surface Finish

01=Single core

S=304ss

L=316L

05=5"

10=10"

20=20"

30=30"

3=222

6=226

K=Tri-clamp

F=Flange

DN20

DN25

DN40

DN65

S=Silicone

F=FKM

E=EPDM

M=Mechanical polishing

(Sanitary Grade)

E=Electro-polishing

Related Products