Sintering Activated Carbon Filter Cartridge
Request a Quote 
Introduction
MS Sintering activated carbon cartridge filter simultaneously remove free chlorine and organic chemicals that contribute to taste and odor while providing the particulate filtration and dirt-holding capacity of a sediment filter. These filters are optimized for applications where they perform the role of both a sediment and activated carbon filter. The sintering process allows the production of a carbon block with more carbon and porosity, but a lower pressure drop. This enables the filter to deliver extended life while removing sediment, chlorine, taste, odor and organic contaminants from water, aqueous solutions or suspensions. The sintering activated carbon filter is ideal, replacement GAC (Granular Activated Carbon) and PAC (Powdered Activated Carbon) filter, for use in residential and commercial water, food service, pre and post-RO systems.
Features
- Eliminates release of carbon fines
- Lowest extractable, pure materials of construction
- Maximum service life and resistance to fouling
- No channeling or bypassing of liquid
- High dirty holding capacity
Applications
- Drinking water and RO pre-filtration
- Food service
- Chlorine, Volatile Organic Compounds
- Residential and Commercial water
Specifications
| Filter Material | Sintering activated carbon |
| Inner diameter | 28mm |
| Outer diameter | 64mm |
| Applicable PH Value | 1~14 |
| Working temperature & Differential Pressure | 80°C@4.2Bar |
| Normal Length | 10’’, 20” |
| Connection Type | DOE |
| Netting | Polyethylene |
| Inner Core | Polypropylene |
| Pore Size/μm | 0.5 / 1.0 / 5.0 / 10 |
| Gasket | NBR/EPDM/Silicon |