2023.1.3.jpg)
SteriPure Series PES Pleated Filter Cartridge with High Flow Rate and Long Service Life
Request a QuoteItem No | Product Name | Description | |
---|---|---|---|
CRPES0040102PV | SteriPure Series Cartridge | Medium: PES, Pore Size: 0.10μm, Length: 4inch, OD: 69mm, Adapter Type: 222/Flat, Sealing: FEP Encapsulated FKM | Request a Quote |
CRPES0050200F | SteriPure Series Cartridge | Medium: PES, Pore Size: 0.20μm, Length: 5inch, OD: 69mm, Adapter Type: DOE, Sealing: FKM | Request a Quote |
CRPES0090202N | SteriPure Series Cartridge | Medium: PES, Pore Size: 0.20μm, Length: 9inch, OD: 69mm, Adapter Type: 222/Flat, Sealing: NBR | Request a Quote |
CRPES0100052PV | SteriPure Series Cartridge | Medium: PES, Pore Size: 0.05μm, Length: 10inch, OD: 69mm, Adapter Type: 222/Flat, Sealing: FEP Encapsulated FKM | Request a Quote |
CRPES0200050S | SteriPure Series Cartridge | Medium: PES, Pore Size: 0.05μm, Length: 20inch, OD: 69mm, Adapter Type: DOE, Sealing: Silicone | Request a Quote |
CRPES0300052E | SteriPure Series Cartridge | Medium: PES, Pore Size: 0.05μm, Length: 30inch, OD: 69mm, Adapter Type: 222/Flat, Sealing: EPDM | Request a Quote |
CRPES0400033F | SteriPure Series Cartridge | Medium: PES, Pore Size: 0.03μm, Length: 40inch, OD: 69mm, Adapter Type: 222/Fin, Sealing: FKM | Request a Quote |
CRPES0400200E | SteriPure Series Cartridge | Medium: PES, Pore Size: 0.20μm, Length: 40inch, OD: 69mm, Adapter Type: DOE, Sealing: EPDM | Request a Quote |
CRPESH0100200S | SteriPure Series Cartridge | Medium: PES, Pore Size: 0.20μm, Length: 10inch, OD: 69mm, Adapter Type: DOE, Sealing: Silicone | Request a Quote |
CRPESH0200224S | SteriPure Series Cartridge | Medium: PES, Pore Size: 0.22μm, Length: 20inch, OD: 69mm, Adapter Type: 222/Fin with SS insert, Sealing: Silicone | Request a Quote |
Description
The SteriPure series PES pleated filter cartridge is made of naturally hydrophilic, highly asymmetric polyethersulfone filter membrane, suitable for the removal of microorganisms and particles in various fluids. It has excellent high service life and high initial flux, which can effectively protect the final filter cartridge in critical applications and improve the cost-effectiveness of the filtration system. It also has good heat resistance and can withstand hot water disinfection and steam sterilization for a long time. The removal rate of the filter cartridge to typical bacteria in industry passes bath validation. Longer flux can be provided while effectively reducing the load.
-
Reliability
Raw materials procurement, product design, production and storage, all operations follow ISO 9001 quality management system. SteriPure is manufactured and packaged in a 100,000 level cleanroom. This product undergoes 100% integrity testing before leaving the factory
-
Compatibility
SteriPure filter cartridge is hot melt welded, and does not contain any adhesive. This product uses naturally hydrophilic PES membrane and food contact grade polypropylene components, which works in pH 1-14 environment for a long time and has very low precipitation.
-
Economy
In many applications, the proven sterile-grade filter cartridges are not necessary but require reliable filter cartridges to reduce turbidity and biological load. SteriPure can provide the best performance and lowest cost in these applications.
-
Regulatory Compliance
ASTM D6394 SP0112
FDA 21 CFR 177.1655
ISO 10993-Part 1, 5
EN 285:2006+A2:2009.
Regulation (EC) No 1935/2004
-
Lower Cost and Better Performance
Asymmetric hydrophilic polyethersulfone membranes with high porosity can provide higher initial flux and service life.
Features
-
Strong chemical compatibility
-
High flux, low protein binding
-
100% integrity test
-
Long service life
Applications
-
Filtration of water for injection, cleaning solutions, purified water, deionized water
-
Filtration of LVP, APIs, buffers, eye drops, disinfectants, etc.
-
Filtration of vaccines, serums, biological products, antibiotic water-based liquid, etc.
-
Filtration of red wine, beer, juice, bottled water, dairy products, etc.
-
Turbidity removal filtration of liquor and spirits
Product Assurance
-
ISO 9001:2015 quality management system
-
100% integrity test
-
Filter cartridge is fully traceable
-
All materials comply with relevant requirements of CFR21
-
Retention efficiency for Monodisperse PSL particles≥99.99%
Technical Parameters
Materials of Construction |
Filter Membrane |
PES |
Support/Drainage |
PP |
|
Cage/End Cap |
PP |
|
Core |
PP/316L Stainless Steel |
|
Adaptor |
PP/PP+Stainless Steel |
|
O-rings |
S/E/N/F |
|
Sealed by hot-melt welding, no adhesive |
||
Filter Dimensions |
Outer Diameter |
69mm |
Inner Diameter |
33mm |
|
Length |
5-40inches |
|
Filtration Area |
≥0.32m² (5inches) ≥0.65m²/10inches |
|
Operating Conditions |
Maximum Differential Pressure (forward) |
5.2 bar @ 25℃,1.9 bar @ 82℃ |
Maximum Differential Pressure (reverse) |
2.1 bar @ 25℃ |
|
Biological Safety |
Endotoxins |
<0.25 EU/mL |
Extractables |
<40 mg/10 inches |
|
Sterilizable |
Steam In-place |
121℃ 30min Differential Pressure<0.5 bar |
Autoclave |
121℃ 30min |
Typical Liquid Flow Rates
Ordering Information
CRPES |
Length |
Pore Size |
Adaptor |
Seal Material |
Core |
005=5" 010=10" 020=20" 030=30" 040=40" |
002=0.02μm 005=0.05μm 010=0.10μm 020=0.20μm 045=0.45μm 065=0.65μm 080=0.80μm 120=1.2μm
|
0=DOE 1=222/Flat with SS insert 2=222/Flat 3=222/Fin 4=222/Fin with SS insert 5=226/Fin with SS insert 6=226/Fin 7=226/Flat 8=226/Flat with SS insert |
S=Silicone E=EPDM N=Nitrile F=FKM |
Blank=PP R=Reinforced PP S=316L Stainless Steel |
Related Products
2023.1.17.jpg)
SteriPure-B Series Sterile-grade PES Pleated Filter Cartridge with High Flow Rate and High Efficiency
2023.1.18.jpg)
SteriPure-D Series Sterile-grade Double-layer PES Pleated Filter Cartridge with Higher Removal Efficiency
2023.1.18.jpg)
SteriPure-P Series Sterile-grade Double-layer PES Pleated Filter Cartridge with Long Service Life and High Efficiency
2023.1.3.jpg)