AquaPure Series String Wound Filter Cartridge
Request a Quote| Item No | Product Name | Description | |
|---|---|---|---|
| CRWPP005005P | Wound Cartridge Filter | 5 inch, 0.5 μm, Polypropylene core | Request a Quote |
| CRWPP010010P | Wound Cartridge Filter | 10 inch, 1.0μm, Polypropylene core | Request a Quote |
| CRWPP020010L | Wound Cartridge Filter | 20 inch, 1.0μm, 316LL core | Request a Quote |
| CRWPP030010S6E | Wound Cartridge Filter | 30 inch, 1μm, 304 SS core, 226/Fin, EPDM | Request a Quote |
| CRWPP040050P | Wound Cartridge Filter | 40 inch, 5.0μm, Polypropylene core | Request a Quote |
| CRWPP050100P | String Wound Cartridge | 50 inch, 10 μm, PP Core, PP Material | Request a Quote |
| CRWPP060050P3E | Wound Cartridge Filter | 60inch, 5.0μm, Polypropylene core, EPDM O-Ring, 222Fin | Request a Quote |
| CRWPP070500S | PP Wound Cartridge Filter | 70 inch, 5μm, 304 SS core, DOE | Request a Quote |
| CRWPP0975050P | Wound Cartridge Filter | 9.75 inch, 5.0μm, Polypropylene core | Request a Quote |
| CRWPP0975500P | Wound Cartridge Filter | 9.75 inch, 50μm, Polypropylene core | Request a Quote |
Description
String wound filter cartridge is a kind of depth filter, which is used for the filtration of liquid with low viscosity and low impurity content. The string wound filter cartridge is made of PP yarn or absorbent cotton or glass fiber yarn precisely wound on the porous skeleton according to a specific density, which has a honeycomb structure with a sparse outside and a dense inside. It can effectively remove suspended matter, particles, rust and other impurities in the fluid, and has very excellent filtration performance.
Features
-
Wide selection of filter materials and core materials ensure superior performance
-
Gradient pore structure effectively removes particles of different size
-
Long service life and save operating costs
-
Extensive chemical resistance
-
High dirt holding capacity
Applications
-
Pretreatment of biopharmaceutical high-purity water/water for injection
-
RO pretreatment
-
Petrochemical/power plant filtration
-
Condensate fine filtration
-
Filtration of microelectronics ultra-pure water
-
Filtration of fine chemical acid and alkali or organic solutions
Technical Parameters
|
Materials of Construction |
Filter Membrane |
PP/Absorbent Cotton/Glass Fiber |
|
Cage/End Cap |
PP |
|
|
Core |
PP/304/316 Stainless Steel |
|
|
Connection |
DOE/222Flat/222Fin/226Fin/226Flat |
|
|
O-rings |
S/F/N/E |
|
|
Filter Dimensions |
Outer Diameter |
63/114mm |
|
Inner Diameter |
28/30mm |
|
|
Removal Rating |
0.5μm/1μm/5μm/10μm/20μm/30μm/50μm/75μm/100μm/150μm |
|
|
Length |
10"/20"/30"/40"/50"/60"/70" |
|
|
Operating Conditions |
Operating Temperature |
PP＜82℃ Absorbent Cotton/Glass Fiber＜120℃ |
|
Maximum Differential Pressure (forward) |
4.2 bar @ 20℃ |
|
|
Recommended Replacement Differential Pressure |
2.4 bar @ 20℃ |
|
|
pH |
1-13 |
Typical Liquid Flow Rates
Ordering Information
|
CRW |
Material |
Length |
Pore Size |
Core |
Adaptor |
Seal Material |
|
PP=Polypropylene CT=Absorbent Cotton GF=Glass Fiber |
010=10" 020=20" 030=30" 040=40" 050=50" 060=60" 070=70" |
005=0.5μm 010=1μm 050=5μm 100=10μm 200=20μm 300=30μm 500=50μm H10=100μm |
P=PP Skeleton S=304SS Skeleton L=316L Skeleton |
Blank=DOE 2=222/Flat 3=222/Fin 6=226/Fin 7=226/Flat |
Blank=Non S=Silicone E=EPDM F=FKM N=Nitrile Rubber |
