|Nylon Syringe Filter,25mm,0.45µm, Non-Steriled||Part Number:SFNY025045N|
The product was manufactured in Membrane Solutions‘ facllity whose Quality Management System is approved by an accredited registering body to the ISO 9001 Quality Systems Standard.
|Syringe Filter Lot Characterization|
|Membrane material and Pore size||Nylon 0.45µm||Filtration area(cm2)||4.08|
|Wettability||Hydrophilic||Holdup volume (μl)||<100|
|Housing Material||Polypropylene||Volume Throughput (ml)||100|
|Inlet/Outlet||Female luer lock/Male luer silp||Bubble point(psi)||40.6|
|Maximum Operating Temperature(°C)||50||Burst pressure(psi)||87|
|No detectable peaks||Pass|
We hereby certify that the above stated membranes/ filters in compliance with all applicable instructions. This certificate shall not be copied or reproduced without the written approval of Membrane Solutions LLC. The document contains information that may be confidential and is intended only for the use of the addressee.