MS® NC Transfer Membrane
Request a QuoteNC Transfer Membrane Introduction
MS® Transfer membrane are purpose-built with features designed to bring the highest levels of performance and purity to your research. We incorporate a variety of membranes to offer separation and purification solutions for the majority of your laboratory needs. Selecting the appropriate membrane is critical to the success of a nucleic acid or protein transfer procedure.
Feature
- Naturally hydrophilic membrane
- Wide range of chemical compatibility to organic solvents
- Highly solvent resistant
- Low no-specific absorbing membrane for maximum protein recovery in critical analysis
- HPLC certification which guarantees the filter will not produce extraneous peaks in the UV range
- 100% integrity tested with higher burst strength ratings assuring they will perform as expected every time
- Available in 13, 25mm sizes so that you can pick the size that’s right for your application and minimize precious sample loss
- Wide range pore sizes 0.1um, 0.22um, 0.45um, 0.8um, 1.0um available, especially 0.45um for the most clarification applications and 0.2um when fine particulates removal is required
Application
- HPLC samples containing low solid content
- Cell Culture samples filtration
- Sterile filtration of low volume samples
- Refravtometry
- UV/Vis samples
Technical Parameter
Technical Parameters of PP Syringe Filter | |||
Diameter | 13mm | 25mm | |
---|---|---|---|
Housing Material | Polypropylene | ||
Membrane Material | PP | ||
Pore Size | 0.1um, 0.22um, 0.45um, 0.8um, 1.0um | ||
Maximum Temperature | ≤50℃ | ||
Inlet Connection | Female luer lock | Female luer lock | |
Outlet Connection | Male Slip luer | Male Slip luer | |
Packing | No Sterile | No Sterile |